ANRITSU S114C CALIBRATION and ANRITSU S114C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S114C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   ANRITSU S114C   Description / Specification:   Spec Sheet 
ANRITSU S114C 1.6 GHz Site Master Antenna, Cable and Spectrum Analyzer

The Anritsu S114C Site Master is a precision hand-held return loss/SWR, fault location and Spectrum analysis measurement instrument. OSL calibration can be applied to all 1-port measurements (RL/VSWR/cable Loss/DTF) enabling accurate vector corrected measurements. Built-in fault location, RF power monitor, bias tee, and spectrum analysis capabilities are available. Site Masters' SPA has dedicated routines for one-button measurements of field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), Carrier-to-Interference, and interference analysis. Light weight, rugged design, and wide temperature range make them ideal for field applications. The S114C Site Master’s proprietary design provides superior immunity to on-channel RF interference, which is important for live site testing. Features. Accurate return loss/SWR and fault location measurements. Accurately tests RF transmission lines and antennas. Superior immunity to on-channel interference for testing at co-located antenna sites. Specifications.

Frequency range: 2 MHz to 1.6 GHz.
Frequency Resolution: 10 kHz.
Frequency Accuracy (CW Mode): ± 75 parts per million.
Display data points Selectable: 130, 259, 517.
Immunity to interfering RF signals: +10 dBm (On-frequency), +17 dBm (On-channel).
Return Loss Range: 0.0 to 54.00 dB, Resolution: 0.01 dB.
VSWR: Range 1 to 65, Resolution: 0.01 dB.
Cable loss: Range 0 to 54, Resolution: 0.01 dB.
Distance-To-Fault (DTF) Vertical Range: Return loss, 0 to 54 dB; SWR, 1 to 65.
DTF Horizontal range (meter): 0 to (# of data points -1) x horizontal resolution, where data points = 130, 259 or 517. Maximum Input (Damage Level) +20 dBm.

Spectrum analysis
Frequency range: 1600 MHz.
Accuracy: ± 2 ppm.
Frequency span: 1 kHz to 1.6 GHz in 1, 2, 5 step selections in auto mode, plus zero span.
Resolution bandwidth: 10 kHz, 30 kHz, 100 kHz, 1 MHz.

Options
Option 5: Power Monitor to measure power - external detector needed.



 

Standard Calibration $380.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S114C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Accuracy
Accuracy is the degree of closeness of measurements of a quantity to that quantity's actual (true) value.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Receiver Sensitivity
Receiver Sensitivity is the optical power required by a receiver for low error signal transmission. In the case of digital signal transmission, the mean optical power is usually quoted in Watts or dBm (decibels referred to 1 milliwatt).


Please contact us for your ANRITSU S114C CALIBRATION and/or ANRITSU S114C 1.6 GHz Site Master Antenna, Cable and Spectrum Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: