ANRITSU S331D REPAIR and ANRITSU S331D CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANRITSU S331D. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S331D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set?
Shop for Comparable Products on our
 used Cellular Test Set page or new Cellular Test Set page

 
   ANRITSU S331D   Description / Specification:    
ANRITSU S331D 4 GHz Site Master Antenna and Cable Analyzer

The Anritsu S331D Site Master is a precision hand-held return loss/SWR and fault location measurement instrument. OSL calibration can be applied to all 1-port measurements (RL/VSWR/cable Loss/DTF) enabling accurate vector corrected measurements. Site Masters' SPA has dedicated routines for one-button measurements of field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), Carrier-to-Interference, and interference analysis. Light weight, rugged design, and wide temperature range make them ideal for field applications. The S331D Site Master’s proprietary design provides superior immunity to on-channel RF interference, which is important for live site testing. Features. Accurate return loss/SWR and fault location measurements. Accurately tests RF transmission lines and antennas. Superior immunity to on-channel interference for testing at co-located antenna sites.
Specifications

Frequency range: 25 MHz to 4.0 GHz.
Frequency Resolution: 100 kHz.
Frequency Accuracy (CW Mode): ± 75 parts per million.
Display data points Selectable: 130, 259, 517.
Immunity to interfering RF signals: -5 dBm (On-frequency), +17 dBm (On-channel).
Return Loss Range: 0.0 to 60.00 dB, Resolution: 0.01 dB.
VSWR: Range 1 to 65.53, Resolution: 0.01 dB.
Cable loss: Range 0 to 30, Resolution: 0.01 dB.
Distance-To-Fault (DTF) Vertical Range: Return loss, 0 to 60 dB; SWR, 1 to 65.53.
DTF Horizontal range (meter): 0 to (# of data points -1) x horizontal resolution, where data points = 130, 259 or 517.
Maximum Input (Damage Level) +20 dBm.

Options
3: Color daylight viewable TFT display.
5: Power Monitor to measure power - external detector needed.
29: Power Meter from 3 MHz to 3 GHz.
31: Built-in GPS receiver provides latitude, longitude, altitude information with trace data.
50: T1/E1 Analyzer.



 

Standard Calibration $465.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S331D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.


Please contact us for your ANRITSU S331D REPAIR and/or ANRITSU S331D 4 GHz Site Master Antenna and Cable Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: