ANRITSU S810C CALIBRATION and ANRITSU S810C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S810C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ANRITSU S810C   Description / Specification:   Spec Sheet 
ANRITSU S810C Site Master Microwave Transmission Line and Antenna Analyzer

3.3 to 10.5 GHz, Portable Network Analyzer for RF transmission line (coax and waveguide) and antenna installation and maintenance. <= 20 KHz, for all frequencies. Frequency Resolution: 1 MHz. Measurement Range: SWR 1.00 to 65.00, Resolution: 0.01 dB. Return Loss Range: 0.0 to 54.00 dB, Resolution: 0.01 dB. Coax/Waveguide Insertion Loss: 0.0 to 54.00 dB, Resolution: 0.01 dB. Distance-To-Fault (DTF) Range: 0 to ((# of data points –1) x resolution) a maximum of 1000m (3281 ft.) with a maximum of 517 points resolution, # of data pts. = 130, 259, 517. Maximum Input (Damage Level) +22 dBm.



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S810C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.


Please contact us for your ANRITSU S810C CALIBRATION and/or ANRITSU S810C Site Master Microwave Transmission Line and Antenna Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: