A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU 37317A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

   ANRITSU 37317A   Description / Specification:    
ANRITSU 37317A 8.6 GHz Vector Network Analyzer

The Anritsu 37317A is a microprocessor controlled Vector Network Analyzer. It integrates a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing. It provides: 22.5 MHz to 8.6 GHz, Fast Sweeping Synthesized Source, Auto Reversing Test Set, Solid-State Transfer Switch, Four Independent Displays, Internal Hard and Floppy Disk Drives, LRL/LRM Calibration, Adapter Removal Calibrations and Fast Measurement Throughput via GPIB. Specifications. Frequency Range: 22.5 MHz to 8.6 GHz. Dynamic Range (“Receiver Dynamic Range” is defined as the ratio of the maximum signal level at Port 2 for 0.1 dB compression to the noise floor at Port 2.; “System Dynamic Range” is defined as the ratio of the power incident on Port 2 in a through line connection to the noise floor at Port 2 (forward measurements only). 10 Hz IF bandwidth and 512 averages were used in calibration and measurement.) Max Signal Into Port 2: 30 dBm. Noise Floor: -95 dBm @ 0.0225 GHz, -98 dBm @ 2 GHz, -98 dBm @ 8.6 GHz. Receiver Dynamic Range: 125 @ 0.0225 GHz, 130 @ 2 GHz, 130 @ 8.6 GHz. Port 1 Power: 0 dBm. System Dynamic Range: 95 @ 0.0225 GHz, 98 @ 8.6 GHz. High Level Noise (typical): <0.04 dB and <0.5° peak-to-peak variation in a 1 kHz IF bandwidth up to 8.6 GHz. Measurement Time vs. Span for 101 Data Points (typical): 22.5 MHz to 8.6 GHz, 500 ms. Number of Channels: Four independent measurement channels. Parameters: S11, S21, S22, S12, or user-defined combinations of a1, a2, b1, and b2. All measurements are made without the need to manually reverse the test device. Display LCD, Color, 8.5-inch diagonal. Options. Opt 1, Slide Rack Mounting. Opt. 1A, Rack Mounting. Opt 2, High Speed Time (Distance) Domain Measurement Capability. Opt 4, External SCSI-2 Hard Disk Drive Compatibility. Opt 7A/N/NF/S/K, Universal Test Port Configuration, Replaces Universal / K Connector (standard) with: 7A - Universal / GPC-7, 7N - Universal / N, male, 7NF - Universal / N, female, 7S - Universal / 3.5 mm, male. Opt 10A, High Stability Time Base.


Standard Calibration $625.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU 37317A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your ANRITSU 37317A CALIBRATION and/or ANRITSU 37317A 8.6 GHz Vector Network Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: