ANRITSU 68177C CALIBRATION and ANRITSU 68177C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU 68177C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU 68177C   Description / Specification:   Spec Sheet 
ANRITSU 68177C 50 GHz Synthesized Signal Generator

The Anritsu 68177C 50 GHz Ultra Low Noise Synthesized Signal Generator features 10 MHz to 50 GHz analog, step, and manual sweep capability. The 68177C also provides AM/FM/pulse modulation via external modulating signals. Output levels to +17 dBm and optional 0.1 Hz resolution are available at prices comparable to CW-only sources. To meet requirements that expand over time, economical upgrades are available to any higher performing model. Features, performance, and value combine to make the 68177C the optimum source for your network analysis and swept A.T.E. source applications. Specifications. Frequency range: 10 MHz to 50 GHz (Optional frequency extension down to 0.1 Hz). CW mode Output: Twenty independent, presettable CW frequencies (F0 to F9 and M0 to M9). CW mode Accuracy: Same as internal or external 10 MHz time base. CW mode Internal time base stability: With aging; <2 x 10–8/day (<5 x 10–10/day with Option 16), With temperature; <2 x 10–8/°C over 0°C (<2 x 10–10/°C with Option 16). CW mode Resolution: 1 kHz (0.1 Hz with Option 11). Analog Sweep width: Independently selected from 1 MHz to full range continuous sweep. Analog Sweep Accuracy: The lesser of ±30 MHz or (±2 MHz widths) for sweep speeds of <=50 MHz/ms. Output power: +12 dBm (+10 dBm with attenuator) >= 0.01 to < 2 GHz, +10 dBm (+8.5 dBm with attenuator) >= 2 to <= 20 GHz, +2.5 dBm (0 dBm with attenuator) > 20 to <= 40 GHz, +2.5 dBm (-1.0 dBm with attenuator) > 40 to <= 50 GHz. Minimum leveled output power range: -20 dBm, (-120 dBm with attenuator). Output power resolution: 0.01 dB (log) or 0.001 mV (linear). Option 1 Rack mounting. Option 2C 110 dB step attenuator. Option 9 Rear panel RF output. Option 11 0.1 Hz frequency resolution. Option 15A High power output. Option 16 High stability time base. Option 18 mmWave bias output. Option 19 SCPI programmability. Option 21 High spectral purity down converter. Option 22 0.1 Hz to 10 MHz audio frequency.



 

Standard Calibration $750.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU 68177C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your ANRITSU 68177C CALIBRATION and/or ANRITSU 68177C 50 GHz Synthesized Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: