ANRITSU MA2424A CALIBRATION and ANRITSU MA2424A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MA2424A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   ANRITSU MA2424A   Description / Specification:    
ANRITSU MA2424A 40 GHz Thermal Power Sensor

The Anritsu MA2424A 40 GHz Thermal power sensor provides excellent power measurement accuracy over 50 dB of dynamic range. Thermal sensors use Seebeck elements where the combined effect of a thermal gradient and charge migration between dissimilar metals gives a true reading of the average power of any incident waveform. Anritsu thermal sensors have class leading SWR and a built-in EEPROM with calibration factor and linearity correction data. This results in assured accuracy when measuring any signal. Specifications. Frequency Range: 10 MHz to 40 GHz. Dynamic range: -30 to +20 dBm. SWR 10 to 50 MHz: <1.90. SWR 50 to 150 MHz: <1.17. SWR 0.15 to 2 GHz: <1.10. SWR 2 to 12.4 GHz: <1.15. SWR 12.4 to 18 GHz. SWR 18 to 32 GHz: <1.25. SWR 32 to 40 GHz: <1.30. Rise Time: <4.0 ms. Sensor linearity: <1.3% <18 GHz, 1.5% < 40 GHz. Maximum input power: 24 dBm, continuous; 30 dBm, 1 us peak, 2.2 V dc. Temperature accuracy (5 to 50 degrees C.): <1.0%. RF connector: K (m).



 

Standard Calibration $350.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MA2424A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ANRITSU MA2424A CALIBRATION and/or ANRITSU MA2424A 40 GHz Thermal Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: