ANRITSU MG3694A CALIBRATION and ANRITSU MG3694A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG3694A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU MG3694A   Description / Specification:    
ANRITSU MG3694A 40 GHz Synthesized Signal Generator

The Anritsu MG3694A synthesized signal generator is a microprocessor-based, synthesized signal source with high resolution phase-lock capability. It can generate both discrete CW frequencies and broad (full range) and narrow band step sweeps across the frequency range of 2 GHz to 40 GHz. Options are available to extend the low end of the frequency range to 0.1 Hz. All functions of the signal generator are fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus. Specifications. Frequency Range: 2 GHz to 40 GHz. Resolution - 0.01 Hz. Phase Offset - 0.1 dB steps. RF Frequency Coverage Extension, down to 0.1 Hz. An optional down-converter covers 10 MHz to 2 GHz, An optional DDS offers additional coverage to 0.1 Hz. Excellent Phase Noise performance as standard. Add optional ultra low phase noise > 2 GHz. Add an optional digital down-converter for: Lowest Phase Noise RF source from 10 MHz to 2.2 GHz ( < 130 dBc/Hz @ 1 GHz, 10 kHz offset). Power Output: standard, 9 dBm >=2 to <=20 GHz, 6 dBm >20 to <=40 GHz; Option 15: 15 dBm >=2 to <=10 GHz, 12 dBm >10 to <=20 GHz, 14 dBm >20 to <=40 GHz . Wide Attenuation Range. - 110 dB Mechanical Attenuator Option. - 120 dB Electronic Attenuator Option. AM/FM/ØM/PM, External or Internal. - 100 ns leveled pulse width >2 GHz, 1 µs <2 GHz. IF Up-Conversion Option. Obtain IQ-modulation microwave signals by up-converting a modulated IF signal. Digital or Analog Sweep



 

Standard Calibration $835.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG3694A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your ANRITSU MG3694A CALIBRATION and/or ANRITSU MG3694A 40 GHz Synthesized Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: