ANRITSU MG3696A CALIBRATION and ANRITSU MG3696A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG3696A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU MG3696A   Description / Specification:    
ANRITSU MG3696A 65 GHz Synthesized Signal Generator

The Anritsu MG3696A synthesized signal generator is a microprocessor-based, synthesized signal source with high resolution phase-lock capability. It can generate both discrete CW frequencies and broad (full range) and narrow band step sweeps across the frequency range of 2 GHz to 65 GHz. Options are available to extend the low end of the frequency range to 0.1 Hz. All functions of the signal generator are fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus. Specifications. Frequency Range: 2 GHz to 65 GHz. Resolution - 0.01 Hz. Phase Offset - 0.1 dB steps. RF Frequency Coverage Extension, down to 0.1 Hz. An optional down-converter covers 10 MHz to 2 GHz, An optional DDS offers additional coverage to 0.1 Hz. Excellent Phase Noise performance as standard. Add optional ultra low phase noise > 2 GHz. Add an optional digital down-converter for: Lowest Phase Noise RF source from 10 MHz to 2.2 GHz ( < 130 dBc/Hz @ 1 GHz, 10 kHz offset). Power Output: standard, 10 dBm >=2 to <=20 GHz, 3 dBm >20 to <=65 GHz. Wide Attenuation Range. - 110 dB Mechanical Attenuator Option. - 120 dB Electronic Attenuator Option. AM/FM/ØM/PM, External or Internal. - 100 ns leveled pulse width >2 GHz, 1 µs <2 GHz. IF Up-Conversion Option. Obtain IQ-modulation microwave signals by up-converting a modulated IF signal. Digital or Analog Sweep



 

Standard Calibration $835.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG3696A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your ANRITSU MG3696A CALIBRATION and/or ANRITSU MG3696A 65 GHz Synthesized Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: