ANRITSU MG3695B CALIBRATION and ANRITSU MG3695B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG3695B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU MG3695B   Description / Specification:    
ANRITSU MG3695B 50 GHz Synthesized Signal Generator

The Anritsu MG3695B 50 GHz Synthesized Signal Generator is microprocessor-based, synthesized signal source with high resolution phase-lock capability. It offers unsurpassed frequency coverage, leveled output power, spectral purity, switching speed, modulation performance, size, upgradeability, reliability, and service. The signal generator is configurable for a broad range of applications from R&D to manufacturing and depot repair. It generates both discrete CW frequencies and broad (full range) and narrow band step sweeps across the frequency range of 2 GHz to 50 GHz. Options are available to extend the low end of the frequency range to 0.1 Hz. All functions of the signal generator are fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus (GPIB). Specifications. Frequency Range: 2 to 50 GHz. Output Power (standard): <=20 GHz (+10.0 dBm), >20 to <= 50 GHz (+3.0 dBm). CW Mode Output: Twenty independent, presettable CW frequencies (F0 – F9 and M0 –M9). Accuracy: Same as internal or external 10 MHz time base. Resolution: 0.01 Hz. Phase-Locked Step Sweep Mode nWidth: Independently selected, 0.01 Hz to full range. Every frequency step in sweep range is phase-locked. Accuracy: Same as internal or external 10 MHz time base. Resolution (Minimum Step Size): 0.01 Hz. Markers: Up to 20 independent, settable markers (F0 – F9 and M0 – M9). Options. 2X - Mechanical Step Attenuator. 2E - Electronic Step Attenuator. 3 - Ultra Low Phase Noise, main band. 4 - 10 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version. 5 - 10 MHz to 2 GHz RF coverage. 6 - Analog Sweep Capability. 7 - IF Up-Conversion. 8 - Power Monitor. 9X - Rear Panel Output. 10 - User-Defined Modulation Waveform Software. 12 - Frequency and Phase Modulation. 14 - Amplitude Modulation. 15X - High Power. 16 - High Stability Time Base. 17 - Delete Front Panel. 18 - mmW Bias Output. 20 - Scan Modulation. 22 - 0.1 Hz to 10 MHz Audio coverage. 26X - Pulse Modulation. 27 - Internal LF and Pulse Generators. 28X - Analog Modulation Suite. 30 - Low Phase Noise. 37A - Performance Suite. 38A - Ultra Performance Suite. 39A,B,C,D - CW Power Meter and Sensor Bundle. 40 - Pulse Power Meter and Sensor Bundle.



 

Standard Calibration $835.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG3695B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your ANRITSU MG3695B CALIBRATION and/or ANRITSU MG3695B 50 GHz Synthesized Signal Generator REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: