ANRITSU S820C REPAIR and ANRITSU S820C CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANRITSU S820C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S820C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ANRITSU S820C   Description / Specification:   Spec Sheet 
ANRITSU S820C Site Master Microwave Transmission Line and Antenna Analyzer

3.3 to 20.0 GHz, Portable Network Analyzer for RF transmission line (coax and waveguide) and antenna installation and maintenance. <= 20 KHz, for all frequencies. Frequency Resolution: 1 MHz. Measurement Range: SWR 1.00 to 65.00, Resolution: 0.01 dB. Return Loss Range: 0.0 to 54.00 dB, Resolution: 0.01 dB. Coax/Waveguide Insertion Loss: 0.0 to 54.00 dB, Resolution: 0.01 dB. Distance-To-Fault (DTF) Range: 0 to ((# of data points –1) x resolution) a maximum of 1000m (3281 ft.) with a maximum of 517 points resolution, # of data pts. = 130, 259, 517. Maximum Input (Damage Level) +27 dBm.



 

Standard Calibration $650.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S820C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.


Please contact us for your ANRITSU S820C REPAIR and/or ANRITSU S820C Site Master Microwave Transmission Line and Antenna Analyzer CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: