A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2721B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

   ANRITSU MS2721B   Description / Specification:    
ANRITSU MS2721B 7.1 GHz Handheld Spectrum / Base Station Analyzer

The Anritsu MS2721B 7.1 GHz Handheld Spectrum Analyzer / Base Station Analyzer has very wide dynamic range, allowing measurement of very small signals in the presence of much larger signals. These pictures show a measurement of a –114 dBm signal with and without the presence of a –22 dBm signal only 20 kHz away. The input attenuation value can be tied to the reference level, reducing the number of parameters a field technician may have to set. The RBW/VBW and the span/RBW ratios can be set to values that are best for the measurements being made, further easing the technician’s burden and reducing the chances of errors. Over 1000 traces with names up to 40 characters long may be saved in the 256 MB non-volatile compact flash memory. These traces can later be copied into a PC using the built-in USB 2.0 connector or the 10/100 Mbit Ethernet connection. Measurements may also be saved directly to Compact Flash or USB Flash Drive. Specifications. Spectrum/Interference Analyzer Frequency Range: 9 kHz to 7.1 GHz. Tuning Resolution: 1 Hz. 1 Hz to 3 MHz RBW Range. Very Low Phase Noise (–95 dBc/Hz Maximum at 10 kHz offset at 100 kHz to 20 GHz). Built-in AM/FM/SSB Demodulator. Built-in Preamplifier. 65 dB Step Attenuator. True RMS Detection. 2+ Hours of Battery Life. Display: 21.5 cm (8.5 in.) SVGA color transmissive LCD. Options. 009, IQ Demodulation Hardware. 019, High Accuracy Power Meter (PSN50 sensor not included). 025, Interference Analysis. 027, Channel Scanner. 031, GPS (includes GPS antenna).


Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2721B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your ANRITSU MS2721B CALIBRATION and/or ANRITSU MS2721B 7.1 GHz Handheld Spectrum / Base Station Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: