A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2723B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our
 used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

   ANRITSU MS2723B   Description / Specification:    
ANRITSU MS2723B 13 GHz Handheld Spectrum / Base Station Analyzer

The Anritsu MS2723B 13 GHz Handheld Spectrum Analyzer / Base Station Analyzer has very wide dynamic range, allowing measurement of very small signals in the presence of much larger signals. These pictures show a measurement of a –114 dBm signal with and without the presence of a –22 dBm signal only 20 kHz away. The input attenuation value can be tied to the reference level, reducing the number of parameters a field technician may have to set. The RBW/VBW and the span/RBW ratios can be set to values that are best for the measurements being made, further easing the technician’s burden and reducing the chances of errors. Over 1000 traces with names up to 40 characters long may be saved in the 256 MB non-volatile compact flash memory. These traces can later be copied into a PC using the built-in USB 2.0 connector or the 10/100 Mbit Ethernet connection. Measurements may also be saved directly to Compact Flash or USB Flash Drive. Specifications. Spectrum/Interference Analyzer Frequency Range: 9 kHz to 13 GHz. Tuning Resolution: 1 Hz. 1 Hz to 3 MHz RBW Range. Very Low Phase Noise (–95 dBc/Hz Maximum at 10 kHz offset at 100 kHz to 20 GHz). Built-in AM/FM/SSB Demodulator. Built-in Preamplifier. 65 dB Step Attenuator. True RMS Detection. 2+ Hours of Battery Life. Display: 21.5 cm (8.5 in.) SVGA color transmissive LCD. Options. 009, IQ Demodulation Hardware. 019, High Accuracy Power Meter (PSN50 sensor not included). 025, Interference Analysis. 027, Channel Scanner. 031, GPS (includes GPS antenna).


Standard Calibration $605.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2723B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ANRITSU MS2723B CALIBRATION and/or ANRITSU MS2723B 13 GHz Handheld Spectrum / Base Station Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: