Keysight (Agilent) 81672B REPAIR and Keysight (Agilent) 81672B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) 81672B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) 81672B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our
 used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   Keysight (Agilent) 81672B   Description / Specification:    
Keysight (Agilent) 81672B 1260 to 1375 nm High Power Tunable Laser Module

The Agilent 81672B Tunable Laser module is a back-loadable module that fits into the Agilent 8164A, 8164B Lightwave Measurement System and the Agilent 8166A, 8166B Lightwave Multichannel System. The Agilent 81672B Tunable Laser module has a built-in wavelength control loop to ensure high wavelength accuracy. As this module is all mode-hop free tunable with continuous output power, it qualifies for the test of the most critical dense-Wavelength Division Multiplexer (dWDM) components. The Agilent 81672B Tunable Laser module delivers a signal with high optical power. Specifications. Wavelength Range: 1260 nm to 1375 nm. Wavelength resolution: 0.1 pm, 17.7 MHz at 1300 nm. Mode-hop free tuning range: Full wavelength range. Max Tuning Speed: 80 nm/s. Absolute wavelength accuracy: ±10 pm. Relative wavelength accuracy: ±5 pm, typ. ±2 pm. Wavelength repeatability: ±0.08 pm, typ. ±0.5 pm. Wavelength stability: <= ±1 pm (typ. 24 hrs at constant temp.). Linewidth (typ.), coherence control off: 100 kHz. Effective linewidth (typ.), coherence ctrl. on: > 50 MHz (1270 NM - 1350 nm at flat output power). Output Power: >= +9 dBm peak typical; Output Min. Power: 0 dBm. Power repeatability (typ.): ±3 mdB. Side-mode suppression ratio (typ.): >= 40 dB (1270 nm – 1375 nm). Relative intensity noise (RIN, typ.): -145 dB/Hz (1270 nm – 1375 nm). Option 071, Polarization-maintaining fiber, Panda-type, for straight contact connectors. Option 072, Polarization-maintaining fiber, Panda-type, for angled contact connectors.



 

Standard Calibration $455.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) 81672B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.


Please contact us for your Keysight (Agilent) 81672B REPAIR and/or Keysight (Agilent) 81672B 1260 to 1375 nm High Power Tunable Laser Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: