|
|
The Agilent DSO5014A 100 MHz InfiniiVision oscilloscope offers responsive deep memory, fast update rates with minimal “dead time,” analog-like display systems, and integrated serial analysis. If you are characterizing signal jitter, a fast update rate gives you accurate results sooner. And when the fast update rate is combined with the 5000 Series’ XGA high-definition display (1024 x 768, 256 intensity levels), subtle differences in these acquisitions become obvious. The Agilent DSO5014A offers up to 12 bits of vertical resolution in real-time, single-shot mode. Analysis functions include subtract, multiply, integrate, and differentiate, as well as Fast Fourier Transforms (FFT). Specifications. Bandwidth: 100 MHz. Maximum sample rate: 2 GSa/s. Channels: 2 Ch 1, 2, 3, and 4 simultaneous acquisition. Memory: Up to 8 Mpts. Vertical resolution: 8 bits, up to 12 in high-resolution or averaging modes. Peak detection: 1 ns peak detect. Averaging: Selectable from 2, 4, 8, 16, 32, 64 ... to 65536. Calculated rise time (= 0.35/bandwidth): 3.5 ns. Range: 2 mV/div to 5 V/div (1 Mohm or 50 ohm). Input impedance: 1 Mohm ± 1% || 12 pF or 50 ohm ± 1.0%, selectable. Horizontal Range: 5 nsec/div to 50 sec/div. Resolution: 2.5 psec. Trigger Sources: Ch 1, 2, 3, 4, line, ext. Display: 6.3-inch (161 mm) diagonal color TFT LCD. Option 080, 8 Mpts memory upgrade (from base 1 Mpts).
|