ANDO AQ8201-414 REPAIR and ANDO AQ8201-414 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANDO AQ8201-414. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ8201-414 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Switch?
Shop for Comparable Products on our  used Optical Switch page

 
   ANDO AQ8201-414   Description / Specification:    
ANDO AQ8201-414 1 x 4 OSW Module

The Ando AQ8201-414 OSW Module (Optical switch 1 input port - 4 output ports) is used with the AQ8201 series, Optical Test and Measurement System. Specifications. Number of channels: 1 x 4. Wavelength range: 1480 to 1620 nm. Applicable fiber: SM (9/125 µm). Optical connector: FC/Angled PC. Specifications at constant temperature, using master cord including connector, at 1550 nm wavelength. Insertion loss: 1.5 dB or less. Optical return loss: 55 dB or more. Optical isolation: 70 dB or more. Polarization dependent loss: 0.05 dB P-P (typ.). Repeatability (After warm-up for one hour): ±0.02 dB (typ.).



 

Standard Calibration $1,240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ8201-414. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ANDO AQ8201-414 REPAIR and/or ANDO AQ8201-414 1 x 4 OSW Module CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: