EXFO IQ-9100-01-04-B REPAIR and EXFO IQ-9100-01-04-B CALIBRATION

The EXFO IQ-9100-01-04-B is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
Custom-Cal has a high success rate in the repair of the EXFO IQ-9100-01-04-B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO IQ-9100-01-04-B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Switch?
Shop for Comparable Products on our
 used Optical Switch page

 
   EXFO IQ-9100-01-04-B   Description / Specification:    
EXFO IQ-9100-01-04-B 1 x 4, 1290 to 1650 nm Optical Switch Module

The Exfo IQ-9100-01-04-B Optical Switch provides highly accurate and repeatable fiber-to-fiber switching and is part of Exfo’s Optical Test System. It is designed for minimal reflectance, the switches integrate precision optical components into a compact modular package.
Specifications.

Mode: Singlemode.
Insertion loss: 0.7 dB (typical), 1.7 dB (maximum).
Backreflection: -55 dB.
Repeatability: ± 0.03 dB.
Operating wavelengths: 1290 to 1650 nm.
Polarization-dependent loss: ≤ 0.05 (typical), 0.10 dB (maximum).
Maximum input power: +24 dBm.
Switching time: 25 ms per channel + 425 (debouncing).
Number of channels: 1x4.
Crosstalk: -80 dB.

Connector code.
50 = FC/PC3.
54 = SC/PC3.
58 = FC/APC2 narrow key.
70 = FC/SPC2.
74 = ST/PC3.
82 = ST/SPC2.
88 = SC/APC2.
89 = FC/UPC2.
90 = ST/UPC2.
91 = SC/UPC2.
EI = UPC Universal Interface.
EA = APC Universal Interface.



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Coherence Length
Average distance over which superimposed waves lose their phase relationships

Linewidth
Linewidth is the width of a spectral line in terms of wavelength, wave number and frequency.

Power Flatness Versus Wavelength
When changing the wavelength at constant power setting and recording the differences between actual and displayed power levels, the power flatness is ± half the span (in dB) between the maximum and the minimum of the measured power levels.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Telecom Bands
Optical fiber communications typically operate in a wavelength region corresponding to one of the following Bands. O Band (original): 1260–1360 nm. E Band (extended): 1360–1460 nm. S Band (short wavelengths): 1460–1530 nm. C Band (conventional): 1530–1565 nm. L Band (long wavelengths): 1565–1625 nm. U Band (ultralong wavelengths): 1625–1675 nm


Please contact us for your EXFO IQ-9100-01-04-B REPAIR and/or EXFO IQ-9100-01-04-B 1 x 4, 1290 to 1650 nm Optical Switch Module CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: