Keysight (Agilent) N4903A CALIBRATION and Keysight (Agilent) N4903A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N4903A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our  used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

 
   Keysight (Agilent) N4903A   Description / Specification:    
Keysight (Agilent) N4903A J-BERT High-Performance Serial BERT

Agilent J-BERT N4903A High-Performance Serial BERT. Key Capabilities: Integrated and calibrated jitter sources: PJ, SJ, RJ, BUJ, ISI and sinusoidal interference. Jitter tolerance testing: PCI Express®, SATA, DisplayPort, Fibre Channel, FB-DIMM, CEI, 10 GbE, XFP/XFI, SFP+. Quick eye masks and BER contours. Bit recovery mode for analyzing undeterministic patterns. SSC generation. CDR with tunable loop bandwidth for compliant measurements for all data rates. Pattern sequencer and capture to simplify the handling of complex data patterns. Subrate clock outputs. Pattern generator options. J-BERT key characteristics: 150 Mb/s to 7 Gb/s or 12.5 Gb/s - enough margin for characterizing today’s most popular serial interfaces. Calibrated and integrated jitter injection (opt. J10). All in one box: RJ, PJ, BUJ, ISI, sinusoidal interference to stress the receiver with > 50 % eye closure. Automated and compliant jitter tolerance tests covers popular serial bus standards: PCI Express, SATA, Fibre Channel, SATA, FB-DIMM, CEI 6G/11G, 10 GbE/XAUI, XFP/XFI, SFP+. Delay control input for generator to apply any external jitter source. Bit recovery mode to test unknown data traffic. Pattern sequencer to generate complex training sequences. SSC clocking for computer buses. Subrate clocks to generate reference clocks easily. Differential I/O for DATA and CLOCK and most supplementary signals for testing serial interfaces. Integrated CDR (clock data recovery) to test clockless devices from 1 to 12.5 Gb/s. Compliant and tunable loop bandwidth (opt. CTR). Highest performance BERT for accurate measurements. Remote operation of GUI via web server.



 

Standard Calibration $1,025.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N4903A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your Keysight (Agilent) N4903A CALIBRATION and/or Keysight (Agilent) N4903A J-BERT High-Performance Serial BERT REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: