ILX LIGHTWAVE LDC-3714C CALIBRATION and ILX LIGHTWAVE LDC-3714C REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDC-3714C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our
 used Laser Diode Controller page

 
   ILX LIGHTWAVE LDC-3714C   Description / Specification:    
ILX LIGHTWAVE LDC-3714C Laser Diode Controller with Temperature Controller

The ILX Lightwave LDC-3714C Laser Diode Controller offers a high stability, low noise current source with an integrated 32W temperature controller specifically designed for controlling the current and temperature of laser diodes. Independent power supplies for laser and TE current provide clean, isolated power for laser protection and stability. All of ILX Lightwave’s proven laser diode protection strategies including slow start, adjustable current limit and compliance voltage, intermittent contact protection, and output shorting relays.
Specifications.

Drive Current Output.
Output Current Range 0 to 50 mA: Setpoint Resolution 1μA, Accuracy +/-0.05% of FS.
Output Current Range 0 to 100 mA: Setpoint Resolution 2μA, Accuracy +/-0.05% of FS.
Compliance Voltage: 0 to 10 V adjustable.
Temperature Coefficient: <50ppm/°C.
Short-Term Stability (one-hour): <20ppm.
Long-Term Stability (24-hour): <40ppm.

Photodiode Feedback.
Type: Differential.
Photodiode Reverse Bias: 0-5V adjustable.
Photodiode Current Range: 5 to 5000μA.
Output Stability: 0.02%.
Setpoint Accuracy: ±0.05% of FS.

Temperature Control.
Temperature Control Range: -100°C to 199°C.
Thermistor Setpoint: -100°C to 199°C.
Short-Term Stability (one-hour): ±0.004°C or better.
Long-Term Stability (24-hours): ±0.01°C.

TEC Output.
Output Type: Bipolar, constant current source.
Compliance Voltage: >8V DC.
Maximum Output Current: 4.0A.
Maximum Output Power: 32W.
Current Noise and Ripple: <1mA rms.



 

Standard Calibration $285.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDC-3714C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.


Please contact us for your ILX LIGHTWAVE LDC-3714C CALIBRATION and/or ILX LIGHTWAVE LDC-3714C Laser Diode Controller with Temperature Controller REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: