ELGAR 751SL REPAIR and ELGAR 751SL CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ELGAR 751SL. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ELGAR 751SL Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   ELGAR 751SL   Description / Specification:    
ELGAR 751SL 750 VA Frequency Changing Linear Power Source

The Elgar 751SL 750 VA solid-state frequency changing linear power source is ideal for general purpose test applications, as well as ATE systems and avionics testing. The output voltage, frequency, current, phase angle and other parameters of the SL Series Power source are controlled by Elgar's fixed, variable, or programmable plug-in oscillators (PIPs).
Specifications.
Number of Phases: 1.
Voltage Range: 0 to 65/130/260 VAC, rear panel and internal jumpers provide either 0-65/130 VAC or 0-130/260 VAC voltage ranges.
Rated Power Output: 750 VA.
Output Current: 17.3 A (0 to 65V), 8.65 A (0 to 130V), 4.3 A (0 to 260V).
Frequency range: 45 Hz to 5 KHz at full rated power. Total Harmonic distortion: 0.6% max over full frequency range.
Line & load regulation: ±1% for 0-100% load change and ±10% input voltage variation cover full frequency range, adjustable to 0.1% for specific load conditions, better than ±0.25% for fixed frequency output.
Response Time: < 50 microseconds.
AC Noise Level: 70 dB below full output voltate with input grounded.
Metering: 0-300 VAC output voltmeter, ± 3% accuracy.



 

Standard Calibration $225.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ELGAR 751SL. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.


Please contact us for your ELGAR 751SL REPAIR and/or ELGAR 751SL 750 VA Frequency Changing Linear Power Source CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: