|
|
The Yokogawa 706121 FG310 1-channel Synthesized Function Generator (with arbitrary sweep and simple arbitary waveform generator functions) features versatile sweep and modulation functions. These instruments offer you the capability to sweep not only frequency, but also other parameters as well, such as phase, amplitude, offset voltage, or duty cycle, with linear, log, linear step, log step, or arbitrary sweep patterns. You can even sweep frequency and amplitude at the same time. Offering up to 256 programmed sequence steps. Specifications. Output channels: 1 channel. Output waveforms: Sine, Square (fixed 50% duty cycle), Triangle (variable symmetry), Pulse (variable duty cycle), or Arbitrary waveform. Output signal: Continuous output(CONT): Waveform output continuously, Phase-continuous only. Triggered output (TRIG): Output preset number (integer) of burst waveforms on trigger sync. Gated output (GATE): Output integer number of burst waveforms while enabled by gate. DC output (DC): Output DC voltage. Frequency range: Sine or Square waveform 1 uHz to 15 MHz, Triangle or Pulse waveform 1 uHz to 200 kHz, Arbitrary waveform 1 uHz to 200 kHz. Resolution: 1 uHz or 9 digits max. Frequency accuracy: ±20 ppm. Frequency stability: ±20 ppm (at ambient temperature of 5 to 40°C). Reference clock: 40.2107 MHz. Maximum output voltage: ±10 V. Amplitude setting range: ±20 Vpp (setting resolution 1 mVpp) (negative amplitude represents inverted waveform). Amplitude accuracy V(1 kHz sine wave): ±(0.8% of setting + 14 mVrms). Offset voltage setting range: ±10 V (setting resolution 1 mV). Offset voltage accuracy: ±(0.3% of setting + 0.5% of amplitude setting +40 mV). Output impedance: 50 ohm ±1% (open when output OFF). DC output setting range: ±10 V (setting resolution 1mV). DC output accuracy: ±(0.3% of setting + 20 mV). Output attenuator setting range: 1/1, 1/10, 1/100. Output attenuator accuracy: 0.2%. Option. /R1, External sweep control.
|