YOKOGAWA SL1000-720120 CALIBRATION and YOKOGAWA SL1000-720120 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA SL1000-720120 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Data Acquisition?
Shop for Comparable Products on our
 used Data Acquisition page

 
   YOKOGAWA SL1000-720120   Description / Specification:    
YOKOGAWA SL1000-720120 High Speed Data Acquisition Mainframe Unit

The Yokogawa SL1000-720120 High Speed Data Acquisition Mainframe Unit delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance. Features. Up to 100 MS/s on all channels (10 ns sampling interval). New 100 MS/s 12-Bit 1 kV¹ isolation module with 20 MHz bandwidth. Supports parallel testing: Perform measurements with up to four simultaneously independent sample rates. Stream data to PC via high speed USB 2.0 or 1000BASE-T Gigabit Ethernet. Real time display on a PC (GIGAZoom engine). Stream data to a PC hard disk or the SL1000's internal hard disk² in real time (at speeds of 1.6 MS/s = 100 kS/s x 16ch). Plug & Play: Auto-recognition of units and modules. Input type: Plug-in module (A/D converters built in to each unit). Maximum number of input channels: 16 (One unit operation), 128 (8 units synchronous operation). Maximum sample rate: 100 MS/s on all channels. Plug-in Modules. 720210, High-speed 100MS/s 12-Bit Isolation Module (2ch). 701250, High-speed 10MS/s 12-Bit Isolation Module (2ch). 701251, High-speed 1MS/s 16-Bit Isolation Module (2ch). 701255, High-speed 10MS/s 12-Bit non-Isolation Module (2ch). 701260, High-voltage 100kS/s 16-Bit Isolation Module (with RMS, 2ch). 701261, Universal Module (2ch). 701262, Universal Module (with Anti-Aliasing Fileter, 2ch). 701265, Temparature / High-precision voltage Module (2ch). 701275, Acceleration / Volatage Module (with Anti-Aliasing Filter 2ch). 701270, Strain Module (NDIS, 2ch). 701271, Strain Module (DSUB, Shunt-CAL, 2ch). 701280, Frequency Module. Options. HD1, Internal 40 GB HDD. C10, Ethernet Interface. P4, Probe power (4-output).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA SL1000-720120. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your YOKOGAWA SL1000-720120 CALIBRATION and/or YOKOGAWA SL1000-720120 High Speed Data Acquisition Mainframe Unit REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: