ANRITSU MT9083B CALIBRATION and ANRITSU MT9083B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MT9083B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   ANRITSU MT9083B   Description / Specification:    
ANRITSU MT9083B ACCESS Master OTDR

The Anritsu MT9083B ACCESS Master OTDR with full 1 × 64 PON support, up to 42 dB, delivers full featured OTDR performance plus loss test set and quality of service measurement in a surprisingly small and lightweight package. At only 28.4 cm wide × 20 cm tall × 7.7 cm deep and 2.2 kg (4.8 lbs.), it is field portable, yet rugged enough to withstand the outside plant environment. When equipped with power meter, visual light source and IP test options, it replaces several, larger pieces of test equipment. An event dead zone of less than 1 m (80 cm typical) and a sampling resolution of 5 centimeters allow the MT9083B to evaluate connections and troubleshoot central office, FTTx and intra-building faults with ease. In addition to its superb high-resolution performance, the MT9083B also features up to 45 dB of dynamic range allowing it to easily test 200 + km spans making it a very useful tool for any network type. Compare current and stored trace data to easily assess changes over time and to locate problems before they effect service or compare traces at different wavelengths to identify installation issues such as macrobending. Specifications. Display: 6.5 inch TFT-LCD (640 × 480, with backlight, transparent type), enhanced indoor/outdoor optional. Interface: USB 1.1, TypeA × 1 (memory), Type B × 1 (USB mass storage). Data Storage: Internal memory; 440 MB (up to 1000 traces), External memory (USB); up to 30,000 traces with 512 MB. Vertical Scale: 0.13, 0.33, 0.65, 1.3, 3.25, 6.5, 13 dB/div. IOR Setting: 1.400000 to 1.699999 (0.000001 steps). Units: km, m, kft, ft, mi. Sampling Resolution: 5 cm (min.). Reflectance Accuracy: Single mode: ±2 dB, multimode: ±4 dB. Distance Accuracy: ±1 m ±3 × measurement distance × 10-5 ± marker resolution (excluding IOR uncertainty). Distance Range: 0.5, 1, 2.5, 5, 10, 25, 50, 100, 200 km (SM), 0.5, 1, 2.5, 5, 10, 25, 50, 100 km (MM). Options. 053, 1310/1550 nm ±25 nm SM. 055, 1310/1550 nm ±25 nm, 1650 nm ±5 nm SM. 056, 1310/1490/1550 nm ±25 nm SM. 057, 1310/1550/1625 nm ±25 nm SM. 058, 1310/1490/1550/1625 nm ±25 nm SM. 059, 1310/1550/1625 nm ±25 nm, 1383 nm ±2 nm SM. 063, 1310/1550 nm ±25 nm SM, 850/1300 nm ±30 nm MM. 010, Protector option (includes rubber bumpers, display cover and shoulder strap). 001, IP Network Connection Check Function. 011, Gigabit Ethernet Upgrade (requires option 001). 004, SMF Optical Power Meter (UPC only). 005, SMF High Power Optical Power Meter (UPC/APC). 007, SMF/MMF Optical Power Meter (UPC/APC). 002, Visible Laser Diode.



 

Standard Calibration $375.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MT9083B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.


Please contact us for your ANRITSU MT9083B CALIBRATION and/or ANRITSU MT9083B ACCESS Master OTDR REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: