ILX LIGHTWAVE LDC-3724C CALIBRATION and ILX LIGHTWAVE LDC-3724C REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE LDC-3724C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Diode Controller?
Shop for Comparable Products on our  used Laser Diode Controller page

 
   ILX LIGHTWAVE LDC-3724C   Description / Specification:    
ILX LIGHTWAVE LDC-3724C 500 mA Laser Diode Driver, 32 W TEC Controller

The ILX LDC-3724C Laser Diode Controller offers a high stability, low noise current source with an integrated 32W temperature controller specifi cally designed for controlling the current and temperature of laser diodes. (200/500mA Current Source, 32W TEC) Output Current Range 0 to 200 mA: Resolution 4 uA +/-0.05% of fs, Compliance Voltage 0 to 10 V adjustable with 50 mV resolution and +/-2.5% accuracy, Temperature Coefficient <50ppm/degC, Short Term Stability (1hr) <20ppm, Long Term Stability (24hr) <40ppm, Noise and Ripple (rms) High Bandwidth Mode <4 uA, Low Bandwidth Mode <2 uA; Drive Current Limit Settings: Range 1 to 202 mA with 1 mA resolution and +/-2 mA accuracy; Photodiode Feedback Type: Differential, 0 to 5V adjustable reverse bias, 5 to 5000 uA current range, 0.02% output stability, setpoint accuracy +/-0.05% of full scale. Output Current Range 0 to 500 mA: Resolution 10 uA +/-0.05% of fs, Compliance Voltage 0 to 10 V adjustable with 50 mV resolution and +/-2.5% accuracy, Temperature Coefficient <50ppm/degC, Short Term Stability (1hr) <20ppm, Long Term Stability (24hr) <40ppm, Noise and Ripple (rms) High Bandwidth Mode <4 uA, Low Bandwidth Mode <2 uA; Drive Current Limit Settings: Range 1 to 505 mA with 2.5 mA resolution and +/-5 mA accuracy; Photodiode Feedback Type: Differential, 0 to 5V adjustable reverse bias, 5 to 5000 uA current range, 0.02% output stability, setpoint accuracy +/-0.05% of full scale.



 

Standard Calibration $240.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE LDC-3724C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your ILX LIGHTWAVE LDC-3724C CALIBRATION and/or ILX LIGHTWAVE LDC-3724C 500 mA Laser Diode Driver, 32 W TEC Controller REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: