Keysight (Agilent) N5181A REPAIR and Keysight (Agilent) N5181A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the Keysight (Agilent) N5181A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N5181A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   Keysight (Agilent) N5181A   Description / Specification:    
Keysight (Agilent) N5181A 1/3/6 GHz MXG RF Vector Signal Generator

The Agilent N5181A MXG RF Vector Signal Generator features fast frequency, amplitude, and waveform switching, industry-best ACPR performance, high reliability, and simplified self-maintenance – all in two rack units (2RU) – Agilent N5181A MXG vector is optimized for manufacturing cellular communications and wireless connectivity components. Agilent MXG vector provides better value for your investment by increasing throughput, improving test yield, maximizing uptime, and saving rack space. With scalable RF and baseband performance, the Agilent N5181A MXG vector is easily configured to meet your specific test needs. Features. –70 dBc ACPR for 4-carrier W-CDMA. Decrease test uncertainty in manufacturing and increase yields. Better device characterization in R&D. Arbitrary switching of frequency, amplitude, or waveforms in <= 1.2 ms. Simultaneously frequency, amplitude, and waveforms switching with list mode in <= 900 µs. Generate wide bandwidth signals up to 100 MHz. 64 MSa of memory for waveform playback. 16-bit DACs for excellent dynamic range. Hardware resampling technology eliminates need for multiple reconstruction filters. Electronic attenuator up to 6 GHz. 160 MHz I/Q modulation bandwidth. Specifications. Frequency Range: 100 kHz to 1 GHz (Option 501), 100 kHz to 3 GHz (Option 503), 100 kHz to 6 GHz (Option 506). Minimum Frequency: 100 kHz. Resolution: 0.01 Hz. Phase Offset: Adjustable in 0.01°. Stability, Internal Time Base Reference Oscillator Aging Rate: <= ± 5 ppm/10 yrs, < ± 1 ppm/yr. Stability, Temperature effects: ±1 ppm (0 to 55°C). Reference Output: Frequency 10 MHz, Amplitude >= +4 dBm (nom) into 50 ohm load. Sweep Modes: Frequency Step, Amplitude Step and Arbitrary List. Amplitude Output Power: –110 to +13 dBm (max). Resolution: 0.01 dB (nom): Step Attenuator: 0 to 130 dB in 5 dB steps, (110 dB without Option 1EQ), electronic type. Options. 501: Frequency range from 100 kHz to 1 GHz. Opt 503: Frequency Range from 100 kHz to 3 GHz. Opt. 506: Frequency Range from 100 kHz to 6 GHz. Opt UNZ: Fast Switching. 1EA: High output power. 1EQ: Low Power (<–110 dBm). Opt UNU: Pulse Modulation. Opt UNW: Narrow Pulse Modulation. Opt UNT: AM, FM, Phase Modulation. Opt 006: Instrument Security. Opt 1ER: Flexible Reference Input (1 – 50 MHz). Opt 1EM: Move RF Output to Rear Panel.



 

Standard Calibration $825.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N5181A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your Keysight (Agilent) N5181A REPAIR and/or Keysight (Agilent) N5181A 1/3/6 GHz MXG RF Vector Signal Generator CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: