ROHDE & SCHWARZ SMR40 REPAIR and ROHDE & SCHWARZ SMR40 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ SMR40. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ SMR40 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   ROHDE & SCHWARZ SMR40 (1104.0002.40)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ SMR40 40 GHz CW, Signal or Synthesized Sweep Generator

The R&S SMR40 (1104.0002.40) 40 GHz CW, signal or synthesized sweep generator can be upgraded any time by means of options to give an AM/FM signal generator or a synthesized sweep generator featuring fast, fully synthesized, analog ramp sweep. Advanced frequency synthesis with fractional-N divider makes for low SSB phase noise and high spurious suppression, both of which are for example prerequisites for reliable receiver measurements. The crystal reference built in as standard ensures an accurate, low-drift output frequency. A high-quality pulse modulator has an on/off ratio is better than 80 dB, the rise/fall time shorter than 12 ns. Pulse widths of up to 25 ns are possible. Specifications. Frequency range: 1 GHz to 40 GHz (10 MHz to 40 GHz optional). Resolution: 1 kHz (0.1 Hz optional). Aging (after 30 days of operation): 1 × 10^–6/year <1 × 10^–7/year. SSB phase noise (f = 10 GHz, 10 kHz from carrier, 1 Hz bandwidth, CW, FM off): <–83 dBc. Maximum level: >+12 dBm (0.01 GHz to <1 GHz), >+8 dBm (1 GHz to <18 GHz), >+7 dBm (18 GHz to 20 GHz), >+11 dBm (>20 GHz to 27 GHz), >+9 dBm (>27 GHz to 40 GHz). Minimum level of all models: -20 dBm (underrange <-20 dBm). Resolution: 0.1 dB or 0.01 dB, selectable. Impedance: 50 ohm. SWR: <2. Options. SMR-B1 (1104.5485.02), OCXO Reference Oscillator. SMR-B3 (1104.5585.02), Frequency Resolution 0.1 Hz. SMR-B4 (1104.5685.02), Ramp Sweep. SMR-B5 (1104.3501.02), AM/FM/Scan Modulator. SMR-B11 (1104.4250.02), Frequency Extension 0.01 GHz to 1 GHz. SMR-B14 (1104.3982.02), Pulse Generator. SMR-B15 (1104.4989.02), RF Attenuator. SMR-B20 (1104.6381.02), Rear Connectors for RF, AF. SMR-B24 (1104.6100.02), IF Input DC to 700 MHz. SMR-B31 (1164.7910.02), Low Leakage. SMR-B17 (1104.5233.02), RF Attenuator. SMR-B20 (1104.6381.02), Rear Connectors for RF, AF. SMR-B24 (1104.6100.02), IF Input DC to 700 MHz. SMR-B31 (1164.7910.02), Low Leakage.



 

Standard Calibration $1,035.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ SMR40. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your ROHDE & SCHWARZ SMR40 REPAIR and/or ROHDE & SCHWARZ SMR40 40 GHz CW, Signal or Synthesized Sweep Generator CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: