ELGAR 400SP REPAIR and ELGAR 400SP CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ELGAR 400SP. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ELGAR 400SP Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   ELGAR 400SP   Description / Specification:    
ELGAR 400SP Plug-In Oscillator for AC Power Source

The Elgar 400 SP Plug-In Oscillator Series allows selection of any fixed frequency from 45 Hz to 5 kHz with DIP switches located behind the blank front panel. Both the RC phase shift oscillators and crystal controlled precision oscillators provide users with variable or fixed frequency capabilities and a low distortion sine wave output to meet a variety of application needs. Optionally, output voltage can be externally programmed with resistance of 0-13 kOhms for a 0-full scale output voltage or with DC voltage of 0-10 VDC for a 0-full scale output voltage. They offer precision frequency resolution of .01/.1/1 Hz and calibration accuracy of ±0.001% of set value.



 

Standard Calibration $225.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ELGAR 400SP. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your ELGAR 400SP REPAIR and/or ELGAR 400SP Plug-In Oscillator for AC Power Source CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: