EXFO PM-1600 CALIBRATION and EXFO PM-1600 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO PM-1600 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   EXFO PM-1600   Description / Specification:    
EXFO PM-1600 High-Speed Power Meter

The Exfo PM-1600 Series High-Speed Power Meter deliver accurate power measurements over a wide dynamic range along with high resolution and excellent linearity. Choose them for automatically measuring discrete values such as insertion loss or, alternately, for continuous monitoring and data acquisition. These stand-alone power meters provide exceptional performance, flexibility, user-friendliness and extensive integration capabilities. The Exfo PM-1600 Power Meters offer ±0.015 dB linearity with a ±5 % absolute uncertainty and a 0.001 dB power resolution. Whether you are measuring absolute or relative power levels, count on efficient, highly accurate measurements. With its fast stabilization time and high sampling rate, the Exfo PM-1600 Power Meter is ideal for system monitoring. To start your data acquisition and take full advantage of the high sampling rates, synchronize acquisitions using the two available trigger types. Select the PM-1100 when measuring high power (up to 20 dBm) in the 750 to 1700 nm wavelength range. The sensitivity of this detector is -75 dBm. These stand-alone power meters provide exceptional performance, flexibility, user-friendliness and extensive integration capabilities. Exfo’s PM-1613/PM-1623, PM-1613W and PM1623W are designed with the user in mind. A menu-driven interface guides you through the operation, displaying results clearly. Control your unit remotely with the GPIB and RS-232 interfaces and control codes from any compatible PC or test station. Number of detectors: 1 (PM-1613 and PM-1613W), 2 (PM-1623 and PM-1623W). Detector type: InGaAs. Detector size (mm): 1 (PM-1613 and PM-1613W), 3 (PM-1623 and PM-1623W). Wavelength range (nm): 800 to 1700. Power range (dBm): 9 to -80 (PM-1613 and PM-1613W), 8 to -70 (PM-1623 and PM-1623W). Uncertainty (%): ±5 (0 dBm to -55 dBm) (PM-1613 and PM-1613W), ±5 (0 dBm to -50 dBm) (PM-1623 and PM-1623W). Linearity (dB): ±0.015 (0 dBm to –55 dBm) (PM-1613 and PM-1613W), ±0.015 (0 dBm to –50 dBm) (PM-1623 and PM-1623W). Noise (peak-to-peak) (pW): 3 (PM-1613 and PM-1613W), 20 (PM-1623 and PM-1623W). Power resolution (dB): 0.001 (9 dBm to -40 dBm) (PM-1613 and PM-1613W), 0.001 (8 dBm to -70 dBm) (PM-1623 and PM-1623W). Wavelength resolution (nm): 0.01, Stabilization time (ms): automatic range: 12 (9 dBm to -80 dBm) 3 (9 dBm to -49 dBm) (PM-1613 and PM-1613W), 6 (8 dBm to -70 dBm) 3 (8 dBm to -49 dBm) (PM-1623 and PM-1623W); fixed range (1 to 4): 1. Sampling rate (sample/s/channel): fast acquisition mode up to 4096; continuous measurement mode up to 256, Fiber type (µm): 5/125 to 62.5/125. Analog output: bandwidth (Hz) (ranges 1 to 6) 700k; 700k; 30k; 30k; 150k; 150k (typical); output voltage (V) between 0 and 2.15 (typical); output impedance (|) 640 (typical). External trigger input voltage (V): 0 to 5 (TTL).



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO PM-1600. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your EXFO PM-1600 CALIBRATION and/or EXFO PM-1600 High-Speed Power Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: