Keysight (Agilent) N1922A CALIBRATION and Keysight (Agilent) N1922A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N1922A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   Keysight (Agilent) N1922A   Description / Specification:    
Keysight (Agilent) N1922A 40 GHz P-Series Wideband Power Sensor

The Agilent N1922A P-Series Wideband Power Sensor is designed for use with the P-Series power meters. It's Internal Zero and Calibration process is used to combine the power sensor and power meter to make accurate power measurements. Specifications. Frequency Range: 50 MHz to 40 GHz. Dynamic Power Range: -35 dBm to +20 dBm (>500 MHz), -30 dBm to +20 dBm (50 MHz - 500 MHz). Damage Level (Average Power): +23 dBm. RF Connector Type: 2.4 mm (m). Power Sensor Maximum SWR: 50.0 MHz to 10.0 GHz, 1.2; 10.0 GHz to 18.0 GHz, 1.26; 18.0 GHz to 26.5 GHz, 1.3; 26.5 GHz to 40.0 GHz, 1.5. Power Sensor Calibration Uncertainty: 50.0 MHz to 500.0 MHz, 4.3%; 500.0 MHz to 1.0 GHz, 4.2%; 1.0 GHz to 10.0 GHz, 4.4%; 10.0 GHz to 18.0 GHz, 4.7%; 18.0 GHz to 26.5 GHz, 5.9%; 26.5 GHz to 40.0 GHz, 6.0%.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N1922A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your Keysight (Agilent) N1922A CALIBRATION and/or Keysight (Agilent) N1922A 40 GHz P-Series Wideband Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: