YOKOGAWA AQ2200-136 CALIBRATION and YOKOGAWA AQ2200-136 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA AQ2200-136 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Tunable Laser Source (TLS)?
Shop for Comparable Products on our  used Tunable Laser Source (TLS) page or new Tunable Laser Source (TLS) page

 
   YOKOGAWA AQ2200-136 (810518904)   Description / Specification:    
YOKOGAWA AQ2200-136 1440-1640 nm Tunable Laser Module

The Yokogawa AQ2200-136 is a Tunable Laser Source for the AQ2200 Series. When it is installed in AQ2200 Series frame controllers, it can be used as a wideband Tunable Laser Source. In addition, it can be combined with an AQ2200 Series sensor module to form a high-speed wavelength dependence loss measurement system. Specifications. Wavelength range: 1440.000 to 1640.000 nm. Wavelength resolution: 1 pm. Absolute wavelength accuracy: Within ±100 pm. Relative wavelength accuracy: Within ±50 pm. Wavelength stability: Within ±5 pm/h. Spectrum line width; NARROW: 1 MHz or less, WIDE: 50 MHz or more. Optical output; Maximum output wavelength: +7 dBm or more, 1520 to 1610 nm: +5 dBm or more, 1475 to 1625 nm: +1 dBm or more, All wavelength ranges: –8 dBm or more. Optical output stability; 5 minutes: Within ±0.01 dB, 1 hour: Within ±0.05 dB, 24 hours: Within ±0.1 dB. Optical output repeatability (relative to wavelength): Within ±0.04 dB. Optical output variation range: 4 dB or more. Wavelength sweeping speed: 50 nm/sec (maximum speed). Approved fiber: SM (ITU-T G.652). Approved optical connector: FC/Angled PC.



 

Standard Calibration $720.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA AQ2200-136. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your YOKOGAWA AQ2200-136 CALIBRATION and/or YOKOGAWA AQ2200-136 1440-1640 nm Tunable Laser Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: