SIECOR 340-1 CALIBRATION and SIECOR 340-1 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SIECOR 340-1 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   SIECOR 340-1 (OTDR Plus Multitester II)   Description / Specification:    
SIECOR 340-1 OTDR Plus Multitester

The Siecor 340-1 OTDR Plus Multitester II with hard drive offers true multitesting capability that features field-installable single-mode, multimode, and quad OTDR modules, visual fault locator, as well as optional built-in power meter and laser source. The standard unit provides internal solid-state memory for 125 traces and a floppy disk drive. The product line offers a large variety of high-performance multimode and single-mode modules featuring a superior single-mode unit with 46 dB dynamic range. SoftView emulation software provides desktop analysis and quality documentation capability. A large 10.4-inch (26.4 cm) display is easy to read and eliminates the need to jump from screen to screen to view results. Because it is active matrix color, readability is further enhanced. Capabilities include incoming reel inspections, link loss measurements, fiber attenuation (dB/km), splice and connector loss, reflectance and optical return loss measurement, length measurement, visual fault location, and a 2 kHz test tone for fiber identification. With the many range and test options available, the unit can be optimized for LAN, telco, or CATV applications. Specialty modules for water intrusion (1244 nm) S-band (1410 nm) and out of band (1625 nm) testing are also available. Because the platform is modular and field-installed, OTDR and VFL options not ordered initially can be added at a later date.



 

Standard Calibration $460.00 *
*This is a Web introductory price for one calibration of the SIECOR 340-1. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your SIECOR 340-1 CALIBRATION and/or SIECOR 340-1 OTDR Plus Multitester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: