YOKOGAWA AQ2200-142 CALIBRATION and YOKOGAWA AQ2200-142 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the YOKOGAWA AQ2200-142 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   YOKOGAWA AQ2200-142 (810518903)   Description / Specification:    
YOKOGAWA AQ2200-142 Dual FP-LD Light Source Module 1310/1550 nm

The Yokogawa AQ2200-142 is a 1310 / 1550 nm Dual FP-LD Light Source for the AQ2200 series. When it is mounted in AQ2200 series frame controllers, it provides high-output, high-stability optical output. The AQ2200-142 has an optical output ON/OFF function, 0-6 dB level adjustment function, and internal modulation function (270 Hz, 1 kHz, 2 kHz). These functions are easy to control through the setting screen. Specifications. Center wavelength: 1310 ±20 nm, 1550 ±20 nm. Spectral width: 5 nm or less (1310 nm), 10 nm or less (1550 nm). Optical output level: -1 dBm or higher. Output level Temperature stabillity: 0.3 dB p-p or less (5 to 40°C, 8 hours). Output level Time stabillity: ±0.005 dB p-p or less (15 minutes), ±0.03 dB p-p or less (24 hours). Optical attenuation width: 0 to 6 dB (steps of 0.01 dB). Internal modulation frequency: 270 Hz, 1 kHz, 2kHz. Applicable fiber: SM (ITU-T G.652). Optical connector: AQ9441(FC or SC) universal adapter.



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the YOKOGAWA AQ2200-142. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your YOKOGAWA AQ2200-142 CALIBRATION and/or YOKOGAWA AQ2200-142 Dual FP-LD Light Source Module 1310/1550 nm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: