JDSU 8126MR CALIBRATION and JDSU 8126MR REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU 8126MR Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   JDSU 8126MR   Description / Specification:    
JDSU 8126MR 1310 / 1550 nm Medium Range OTDR Module

The JDSU 8126MR Medium Range OTDR Module helps cable operators, dark fiber providers and telecommunication service providers to characterize, maintain and troubleshoot CWDM fiber networks. The plug-in's automation and rapid testing features offer impressive time savings for companies involved in commissioning and locating faults in optical fiber. It is used with the MTS/T-BERD platforms. Technical specifications. Central Wavelength: 1310 / 1550 ± 20 nm. Min IEC Dynamic (Guaranteed value corresponding to the one-way difference (in dB) between the level of back-diffusion extrapolated at the beginning of the fiber and the level containing 98% of noise, after 3 minutes of averaging, with the largest pulsewidth (according to IEC 61749 standard): 39 / 37 dB. Typical RMS Dynamic Range (Typical value corresponding to the difference (in dB) between the level of back-diffusion extrapolated at the beginning of the fiber and the RMS noise level , after 3 minutes of averaging, with the largest pulsewidth.): 40 / 38 dB. Distance Range: up to 380 km. Pulse width: 3ns to 20 µs. Event Dead Zone (measured at 1.5 dB below the peak of a non-saturated reflecting event at shortest pulsewidth): 0.8 m. Attenuation Dead Zone: 4 m. Continuous Wave Output Power: -3.5 dBm. Modulated wave output power (Auto, 270/330/1k/2k Hz): -6.5 dBm.



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU 8126MR. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your JDSU 8126MR CALIBRATION and/or JDSU 8126MR 1310 / 1550 nm Medium Range OTDR Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: