OPTRONICS OPT-OTDR-UK CALIBRATION and OPTRONICS OPT-OTDR-UK REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the OPTRONICS OPT-OTDR-UK Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   OPTRONICS OPT-OTDR-UK   Description / Specification:    
OPTRONICS OPT-OTDR-UK Handheld OTDR

The Optronics OPT-OTDR-UK is a multimode and singlemode OTDR specifically designed for testing and trouble-shooting on enterprise, campus and access networks. The OTDR’s robust construction and long battery life make it ideal for use in the field. A single button push starts a test, making it simple to use for the beginner or expert. The result is then shown as a trace or table-ofevents in full colour, making for uncomplicated location of faults on fibre cable. By transferring the results to a USB memory stick, or directly to PC via the USB port, easy management of the results can be achieved using the free software provided. Improved fibre testing capability can be achieved by adding the optional power meter, visual fault locator and connector end-face inspection probe. This ensures that the Optronics OTDR is a truly versatile fibre optic test instrument. Features. 850/1300nm wavelengths for multimode, 1310/1550nm wavelengths for singlemode. Internal memory for up-to 500 results. 8 hour battery life. Specifications. Wavelength: 850/1300nm (MM), 1310/1550nm (SM). Dynamic Range: 20/20dB (MM), 25/24dB (SM). Event Dead Zone 3.5m (MM), 3m (SM). Attenuation Dead Zone 12/12m (MM), 12/13m (SM). Sampling resolution: 0.16m to 5m. Sampling Points: Over 30,000. Distance Range 5km / 25km (MM), 55km / 75km (SM).



 

Standard Calibration $350.00 *
*This is a Web introductory price for one calibration of the OPTRONICS OPT-OTDR-UK. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.

Please contact us for your OPTRONICS OPT-OTDR-UK CALIBRATION and/or OPTRONICS OPT-OTDR-UK Handheld OTDR REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: