CORNING MINIDK CALIBRATION and CORNING MINIDK REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CORNING MINIDK Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   CORNING MINIDK   Description / Specification:    
CORNING MINIDK OV-Mini Optical Time Domain Reflectometer

The Corning Cable Systems MiniDK OV-Mini Optical Time Domain Reflectometer (OTDR) provides a rugged, handheld and lightweight solution for testing and troubleshooting fiber optic networks. This handheld OTDR gives the operator the flexibility of testing single-mode and 50 and 62.5 µm multimode systems with the same unit. The OV-Mini provides complete connectivity flexibility (with USB stick compatability and USB cable download) and top user-friendliness (offering one-touch testing). A power meter, Visual Fault Locator (VFL) and video inspection software is included. The OV-Mini utilizes Windows® CE technology allowing for a faster power-up time of four seconds from sleep mode.The OV-Mini has a large internal memory that typically stores up to 500 traces and eliminates the need for a hard drive, which can fail under extreme field conditions. Specifications. Wavelengths: 850 / 1300 / 1310 / 1550 nm. Dynamic Range: 24/25/29/28 dB (850 / 1300 / 1310 / 1550 dB). Pulse Width: 10, 30, 100, 275, 1000 ns (Multimode); 10, 30, 100, 275, 1000, 2500, 10,000 (Single-mode). Event Dead Zone: 2.5 m. Attenuation Dead Zone: 11/11/11/12 m (850 / 1300 / 1310 / 1550 dB). Linearity: ± 0.03 dB. Loss Threshold: 0.05 dB. Loss Resolution: 0.01 dB. Sampling Resolution: 0.16 to 5 m. Sampling Points: Up to 30,000. Distance Uncertainty e (m): ± (0.75 + 0.0025% x distance + sampling resolution). Distance Range: 0.65 - 160 km. Typical Real-Time Refresh: 2 Hz. Memory Capacity: 500 traces. CW Source: Yes.



 

Standard Calibration $530.00 *
*This is a Web introductory price for one calibration of the CORNING MINIDK. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Broadband Source (BBS)
A Broadband Source is a spectrally large source that emits a signal which contains a continuous range of frequencies with a broad optical bandwidth (usually 100 nm or more). Sometimes called a white light source, there are two different meanings of this term. Visible white light and a source which does not necessarily emit in the visible spectral region.

Coherence
Coherence is the pattern and or relationships of waves due to phase properties.

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Power Flatness Over Modulation
When changing the wavelength and modulation frequency, and measuring the differences between actual and displayed power levels (in dB), the power flatness is ± half the span between the maximum and the minimum value of all differences.

Singlemode fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your CORNING MINIDK CALIBRATION and/or CORNING MINIDK OV-Mini Optical Time Domain Reflectometer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: