FIS OVP-1300 CALIBRATION and FIS OVP-1300 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FIS OVP-1300 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   FIS OVP-1300   Description / Specification:    
FIS OVP-1300 1300 nm Multimode BOBCAT OTDR w/VFL

The FIS OVP-1300 1300 nm Multimode BOBCAT OTDR w/VFL features Trace Overlay, Visual Fault Locator, Color Display, One Button Autotest and Event Analysis. The OVP-1300 OTDR’s abundant dynamic range and a 2 meter dead zone, makes it ideal for links up to 240km as well as being perfect for short LAN links within the facility. Weighing in at less than two pounds, this OTDR is ideal for all conditions. The rubber boot with bail adds protection and provides the ideal angle for viewing the display while operating on a work bench. Trace analysis and reporting is fast and easy with the Pass/Fail feature, onboard event table or the supplied Telcordia SR4731 compatible software with multi-trace capability. The OTDR has on board storage of 1000 traces with the ability to download traces directly to your computer via USB cable. Specifications. Wavelength: 1300 ±20nm. Dynamic Range: 26dB MM. Pulse Width: 20 - 10,000 ns. Units of Measurement: km, kf. Event Dead zone: 2m. Attenuation Dead Zone: 5m. Resolution: 0.25 to 64m. Distance Uncertainty: ±(0.75m + 0.005% x distance + sampling resolution). Full Scale Distance Range: 1-64km MM. Typical Real-time Refresh Rate: 4 Hz. Group Index of Refraction (GIR): 1.024 - 2.048. Linearity: ± .05 dB/dB. Memory Capacity: 1000. Memory Type: Internal. Visible Light Source; Emitter Type: Laser. Wavelength: 650nm ±5nm. Output Power: 1mW Max.



 

Standard Calibration $350.00 *
*This is a Web introductory price for one calibration of the FIS OVP-1300. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your FIS OVP-1300 CALIBRATION and/or FIS OVP-1300 1300 nm Multimode BOBCAT OTDR w/VFL REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: