DEVISER DS8853B CALIBRATION and DEVISER DS8853B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the DEVISER DS8853B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   DEVISER DS8853B   Description / Specification:    
DEVISER DS8853B 3 GHz Spectrum Analyzer, 75 ohm

The Deviser DS8853B Portable 3 GHz Spectrum Analyzer 75 ohm with CATV, is used to analyze RF signals with a comprehensive scope of measurement in the HFC network. This can also be used in analyzing the system of mobile communication, satellite and so on. From analysis of digitally modulated signals to test of distortion and noise parameters in the field, the Deviser DS8853B is an industry workhorse. The analyzer is specifically focused on the cable TV industry with application specific test features as well. The DS8853B includes CATV Analysis: Level, HUM, Depth of Modulation Depth, C/N, CSO/CTB, Cross-Modulation, In Channel Frequency Response, Differential Phase /Gain, Chrominance to Luminance Delay Inequality, etc. Specifications. Frequency Range: 500 KHz to 3000 MHz. Reference Frequency Stability: ±1 x10^-6 / ±1 x10^-7(Option). Frequency Temperature Stability: ±2 x10^-6(0 to 50) C. Resolution: 1 Hz. Frequency Counter Accuracy: ±1 (S/N >25dB). Resolution: 1Hz. Frequency Scan Width Range: 0 Hz (Zero Span), 1 KHz to 3000 MHz. Sweep Time: 20 mS to 250S (Span >= 1 KHz), 20 µS to 250S (Span = 0 Hz). Time Accuracy: ±0.2%. Triggering Type: Free Trigger, Single Trigger, Video Trigger, Line Trigger. Resolution Bandwidth (RBW) Range: 1 KHz to 3 MHz 1-3 Step and 30 Hz, 100 Hz, 300 Hz (Option). Accuracy: ±10%. Selectivity: (60 dB / 3 dB Bandwidth Rate) < 5:1. Video Bandwidth (VBW): 10 Hz to 1 MHz (1-3 Step). Phase Noise: -120 dBc/Hz @ 100 kHz offset (typical), -100 dBc/Hz @10 kHz offset (typical). Attenuator Range: 0 dB to 60 dB, Step 5 dB, 1 dB (Option). Maximum input: +30dBm (Peak Power/ Enter Attenuation 15 dB), 100V DC. Power Supply: 14.8V / 8Ah Li-lon Battery. Working Time >3 hours. Options. Tracking Generator, 3 GHz. 30/100/300 Hz RBW. Spectrum Monitoring.



 

Standard Calibration $605.00 *
*This is a Web introductory price for one calibration of the DEVISER DS8853B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your DEVISER DS8853B CALIBRATION and/or DEVISER DS8853B 3 GHz Spectrum Analyzer, 75 ohm REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: