NEW DEVISER NA7300B SALES and DEVISER NA7300B CALIBRATION

 
Custom-Cal has for sale a new DEVISER NA7300B. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the DEVISER NA7300B. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
List Price for a new DEVISER NA7300B, $10,995.00   DEVISER NA7300B   Description / Specification:    
DEVISER NA7300B 3 GHz Vector Network Analyzer, 75 ohm

The Deviser NA7300B 3 GHz Vector Network Analyzer 75 ohm, features high accuracy and large dynamic range, which adopted Direct Digital Synthesis (DDS) signal generator and multi-receiver technique. So it can quickly measure the important index such as transmission, reflection, phase and group delay. NA7300 is the perfect tool to test linear or nonlinear equipment of RF system (Radio Station, CATV, communication receiver or other wireless communication systems). The NA7300B is ideal for testing of narrowband filters, sound surface wave parts, amplifiers, antennas, impedance transforming subassembly, cable etc. Also automatic conformity testing and rapid testing is favorite and useful for volume production. Features. Two channels, Four traces display. Fast sweep time. Save/ print/ recall function. USB, parallel, RS-232 and VGA, LAN interface. Automatic PASS/FAIL judgement. Specifications. Source Characteristics; Frequency Range: 300 KHz to 3 GHz. Frequency stability: <= ±5 ppm. Frequency Resolution: 1 Hz. Phase Noise: <= -65 dBc/Hz (10K HZ Offset). Output Level Range: -48 dBm to +10dBm. Level Accuracy: <= ±1.5 dB (-45 dBm to +5dBm). Harmonic Rejection: >= -30 dBc (>1MHz) <= -25 dBc (<= 1 MHz). Directivity: >= 50 dB (After Vector calibration). VSWR: <= 1.3. Receiver Characteristics; Resolution Bandwidth: 100 Hz to 15 KHz. Dynamic Range: >= 100 dB (RBW = 1 KHz). Level Accuracy: <= ±1.5 dB. Measurement Resolution: 0.01dB. Maximum Input Level: +10 dBm. Input shatter level: +20dBm. VSWR: <= 1.2. Phase Characteristics; Phase Resolution: 0.01°. Phase Veracity: 0.5° (RBW = 1 KHz), 1° (RBW = 3 KHz). Display Characteristics: Sweep Time: 150 ms/field to 20 s/field (201points). Display: 7.5" Color TFT LCD.



 

Standard Calibration $510.00 *
*This is a Web introductory price for one calibration of the DEVISER NA7300B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.


Please contact us for your new DEVISER NA7300B sale price and/or DEVISER NA7300B CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: