NEW DEVISER NA7300A SALES and DEVISER NA7300A CALIBRATION

 
Custom-Cal has for sale a new DEVISER NA7300A. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the DEVISER NA7300A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
List Price for a new DEVISER NA7300A, $10,995.00   DEVISER NA7300A   Description / Specification:    
DEVISER NA7300A 3 GHz Vector Network Analyzer, 50 ohm

The Deviser NA7300A 3 GHz Vector Network Analyzer 50 ohm, features high accuracy and large dynamic range, which adopted Direct Digital Synthesis (DDS) signal generator and multi-receiver technique. So it can quickly measure the important index such as transmission, reflection, phase and group delay. NA7300 is the perfect tool to test linear or nonlinear equipment of RF system (Radio Station, CATV, communication receiver or other wireless communication systems). The NA7300A is ideal for testing of narrowband filters, sound surface wave parts, amplifiers, antennas, impedance transforming subassembly, cable etc. Also automatic conformity testing and rapid testing is favorite and useful for volume production. Features. Two channels, Four traces display. Fast sweep time. Save/ print/ recall function. USB, parallel, RS-232 and VGA, LAN interface. Automatic PASS/FAIL judgement. Specifications. Source Characteristics; Frequency Range: 300 KHz to 3 GHz. Frequency stability: <= ±5 ppm. Frequency Resolution: 1 Hz. Phase Noise: <= -65 dBc/Hz (10K HZ Offset). Output Level Range: -48 dBm to +10dBm. Level Accuracy: <= ±1.5 dB (-45 dBm to +5dBm). Harmonic Rejection: >= -30 dBc (>1MHz) <= -25 dBc (<= 1 MHz). Directivity: >= 50 dB (After Vector calibration). VSWR: <= 1.3. Receiver Characteristics; Resolution Bandwidth: 100 Hz to 15 KHz. Dynamic Range: >= 100 dB (RBW = 1 KHz). Level Accuracy: <= ±1.5 dB. Measurement Resolution: 0.01dB. Maximum Input Level: +10 dBm. Input shatter level: +20dBm. VSWR: <= 1.2. Phase Characteristics; Phase Resolution: 0.01°. Phase Veracity: 0.5° (RBW = 1 KHz), 1° (RBW = 3 KHz). Display Characteristics: Sweep Time: 150 ms/field to 20 s/field (201points). Display: 7.5" Color TFT LCD.



 

Standard Calibration $510.00 *
*This is a Web introductory price for one calibration of the DEVISER NA7300A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.


Please contact us for your new DEVISER NA7300A sale price and/or DEVISER NA7300A CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: