NEWPORT 2560P CALIBRATION and NEWPORT 2560P REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the NEWPORT 2560P Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Polarization Meter?
Shop for Comparable Products on our  used Polarization Meter page or new Polarization Meter page

 
   NEWPORT 2560P   Description / Specification:    
NEWPORT 2560P Polarization Stabilizer

The Newport 2560P fiber-optic Polarization Stabilizer offers fast response, low insertion loss, and reset-free polarization stabilization that can be used in coherent communications, fiberoptic sensors, fiber-optic interferometers, and all other applications that require a stable state of polarization (SOP). The polarization stabilizer integrates a dynamic polarization controller, an optical polarization detection circuit, and a microprocessor based electronic control circuit. It uses a proprietary polarization control algorithm that is capable of handling continuous slow polarization drift in one or more directions, such as polarization rotation in a single direction or in both directions. The 2560P Polarization Stabilizer has two optical fiber connectors mounted on the front panel: an input connector to receive the input light beam and an output connector to couple the polarization state stabilized light beam downstream. Specifications. Operating wavelength: 1260 to 1650 nm standard. Tracking time: < 20 ms. SOP accuracy: < 0.1 dB. Repeatability: < 0.1 dB. Insertion loss: 0.8 dB typical, 1.2 dB max. Return loss: > 50 dB. Isolation in orthogonal polarization: 20 dB. Minimum optical input: -13 dBm. Optical power handling: 20 dBm maximum.



 

Standard Calibration $1,100.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the NEWPORT 2560P. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your NEWPORT 2560P CALIBRATION and/or NEWPORT 2560P Polarization Stabilizer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: