AMPROBE PM51A CALIBRATION and AMPROBE PM51A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AMPROBE PM51A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   AMPROBE PM51A   Description / Specification:   Spec Sheet 
AMPROBE PM51A Pocket Digital Multimeter

The Amprobe PM51A pocket sized meter is only 3/8" thick and weighs less than 3 oz. With full functionality offering AC and DC voltage to 600V, resistance to 40 megohm, capacitance to 3000 µF, frequency to 1 MHz, continuity with beeper, and diode test. Fully auto-ranging, this meter offers seven different measurement functions with 27 full ranges of measurement. The digital display is oversized with large digits and annunciators. In spite of its size, this meter is fully safety rated to CAT III 300 V, CAT II 600 V and is UL listed. No other meter offers this small size with such performance and high safety ratings. Specifications. DC Voltage: 400.0 mV ± (1.0 %+2 dgt), 4.000 V, 40.00 V, 400.0 V ± (2.0 %+2 dgt), 600 V ± (2.5 %+4 dgt). AC Voltage: 50 Hz - 60 Hz 4.000 V, 40.00 V, 400.0 V ± (2.0 %+5 dgt), 60 Hz - 500 Hz 4.000 V, 40.00 V, 400.0 V ± (3.0 %+5 dgt), 50 Hz - 500 Hz 600 V ± (3.5 %+5 dgt). Capacitance: 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF, 3000 µF ± (3.5 %+6 dgt). Resistance: 400.0 ohm ± (1.5 %+6 dgt), 4.000 Kohm, 40.00 Kohm, 400.0 Kohm ± (1.0 %+4 dgt), 4.000 Mohm ± (1.5 %+4 dgt), 40.00 Mohm ± (2.5 %+4 dgt). Frequency: 400 Hz, 4 kHz, 40 kHz, 400 kHz, 1 MHz ± (0.5 %+4 dgt). Diode Tester Test current (typical): 0.25 mA. Audible Continuity Tester threshold: 65 ohm ±55 ohm. Display and update rate: 3-3/4 digits 4000 counts; Updates 3 per second nominal.



 

Standard Calibration $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AMPROBE PM51A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your AMPROBE PM51A CALIBRATION and/or AMPROBE PM51A Pocket Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: