SORENSEN DCS60-50E CALIBRATION and SORENSEN DCS60-50E REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS60-50E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   SORENSEN DCS60-50E   Description / Specification:    
SORENSEN DCS60-50E 60V 50A Single Output DC Power Supply

The Sorensen DCS60-50E DC System Power Supply is a 3000-watt supply designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS-E Series employs high frequency switching regulator technology to achieve high power density and small package size. Features. Simultaneous digital display of both DC output voltage and current. Ten-turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the model-rated output. Front panel push button control of Output Standby Mode, OVP reset, Remote/Local Programming Mode selection, and preview of voltage, current, or OVP setpoints. External indicator signals for Remote Monitoring of OVP Status, Local/Remote Programming Status, Thermal Shutdown, and Output Voltage and Current. Current or Voltage Mode operation with Automatic Mode Crossover to respond to varying load requirements. Flexible output configuration where multiple units can be connected in series or in parallel to provide increased voltage or increased current. Remote Sensing to compensate for losses in power leads up to 1V per lead. Adjustable Over Voltage Protection (OVP). External Shutdown using AC, DC, or TTL compatible signals (positive or negative logic). Remote Voltage, Current Limit, and OVP Programming with selectable programming ranges. Specifications. Output Voltage: 0 to 60 V. Output Current: 0 to 50 A. Output Power: 3000 W. Line Regulation Voltage: 60 mV. Line Regulation Current: 50 mA. Load Regulation Voltage: 60 mV. Load Regulation Current: 50 mA. Meter Accuracy Voltage: 0.7 V. Meter Accuracy Current: 0.6 A. OVP Adjustment Range: 3 to 66 V. Output Noise and Ripple (V) (20 Hz - 20 MHz): Rms 20 mV, p-p 100 mV. Analog Programming Linearity Voltage: 600 mV. Analog Programming Linearity Current: 500 mA. Stability Voltage: 30 mV. Stability Current: 25 mA. Temperature Coefficient Voltage: 12 mV/°C. Temperature Coefficient Current: 15 mA/°C.



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS60-50E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your SORENSEN DCS60-50E CALIBRATION and/or SORENSEN DCS60-50E 60V 50A Single Output DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: