SORENSEN DCS12-250 CALIBRATION and SORENSEN DCS12-250 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS12-250 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   SORENSEN DCS12-250   Description / Specification:    
SORENSEN DCS12-250 12V 250A Single Output DC Power Supply

The Sorensen DCS12-250 programmable power supply incorporates current mode switching rates up to 100 kHz in high power density, low profile packages. Utilizing state-of-the-art technology and unique packaging techniques, the DCS12-250 provides continuous full output power in any volt/amp combination within the rated output voltage and current limits. Options include an internal IEEE-488/RS-232 interface and isolated analog programming of voltage or current. Specifications. Output Voltage: 0 to 12 V. Output Current: 0 to 250 A. Regulation Line and Load: 0.2%. Constant Voltage Mode Ripple (PARD): 20 mV rms. Constant Voltage Mode Resolution: 0.02%. Constant Voltage Mode Transient Response Time (Typ.): 500 µs. Temperature Coefficient Voltage (Typ.): 0.02 % C. Voltage Drift (Typ.): 0.05% V max. Constant Current Mode Regulation Line and Load: 0.2%. Constant Current Mode Ripple (PARD): 400 mA rms. Constant Current Mode Resolution (Typ.): 0.02%. Temperature Coefficient Current (Typ.): 0.03 % C. Current Drift (Typ.): 0.05% V max. Transient Response: < 1 ms recovery to 1 % band for 30% step load change (70- 100% or 100-70%) 500 µs typical. Stability: 0. 5% drift max over 8 hrs. with constant line, load and temperature, following 20 minute warm-up. Options. M51: Isolated programming control of either the output current or voltage using analog signals that can be biased up to 600V relative to the supply's return line. M85: Slave multichannel interface control.



 

Standard Calibration $450.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS12-250. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your SORENSEN DCS12-250 CALIBRATION and/or SORENSEN DCS12-250 12V 250A Single Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: