JDSU N530-0131 CALIBRATION and JDSU N530-0131 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU N530-0131 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   JDSU N530-0131   Description / Specification:    
JDSU N530-0131 TestPoint Multi-Rate Module

The JDSU N530-0131 TestPoint Multi-Rate Module is a single-slot, customizable module with three physical ports: OC-48/STM-16 (option for G.709 OTN), OC-3/12 STM-1/4 and Ethernet/Fibre Channel. One physical port can be active at a time for testing and at least one synchronous optical network technologies/synchronous digital hierarchy (SONET/SDH) port must be licensed. For the convenience of changing wavelengths and protocols, pluggable SFP optical/electrical interfaces are used. Traffic generation of up to 128 streams is provided on all supported Ethernet rates. A hardware option provides digital wrapper and forward error correction (FEC) G.709 OTN support on the OC-48/STM-16 port. Both SONET/SDH ports support licensed options for Ethernet over SONET/SDH (VCAT and GFP-F) and asynchronous transfer mode (ATM). Additional options include Ethernet over PDH (EoPDH) (DS1/E1/DS3/E3 into SONET/SDH with GFP-F/HDLC payload), RPR Intrusive Monitor Mode on OC-48/STM-16, and ODU1 line rate (2.499 G). The Multi-Rate Module can be inserted into multiple scalable TestPoint chassis including the highly compact TestPoint TS-10. Up to sixteen 1 Gbps modules can be inserted into the TS-170 for a high-density, rack-mounted test solution.



 

Standard Calibration $480.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU N530-0131. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your JDSU N530-0131 CALIBRATION and/or JDSU N530-0131 TestPoint Multi-Rate Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: