AMPROBE 30XR-A CALIBRATION and AMPROBE 30XR-A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AMPROBE 30XR-A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   AMPROBE 30XR-A   Description / Specification:   Spec Sheet 
AMPROBE 30XR-A Auto Ranging Digital Multimeter with Non-Contact Volt Detect

The Amprobe 30XR-A Digital Multimeter offers Voltect™ non-contact voltage technology built into the 30XR-A along with a full complement of measurement functions. Specifications. DC Voltage ranges: 200 mV, 2 V, 20 V, 200 V, 600 V. DC Voltage accuracy: all ranges: ± (1 % rdg + 1 dgt). DC Voltage resolution: 100 µV. AC Voltage (45 Hz to 500 Hz) ranges: 200 mV, 2 V, 20 V, 200 V, 600 V. AC Voltage (45 Hz to 500 Hz) accuracy: all ranges: ± (1.5 % rdg + 4 dgts). AC Voltage (45 Hz to 500 Hz) resolution: 100 µV. DC Current ranges: 200 µA, 2 mA, 20 mA, 200 mA, 10 A. DC Current accuracy: 200 µA to 200 mA ranges ± (1.5 % rdg + 1 dgt), 10 A range: ± (2.0 % rdg + 3 dgts). DC Current resolution: 0.1 µA. AC Current (45 Hz to 500 Hz) ranges: 200 µA, 2 mA, 20 mA, 200 mA, 10 A. AC Current (45 Hz to 500 Hz) accuracy: 200 µA to 200 mA ranges ± (2.0 % rdg + 4 dgts), 10A range: ± (2.5 % rdg + 4 dgts). AC Current resolution: 0.1 µA. Resistance Ranges: 200 ohm, 2 kohm, 20 kohm, 200 kohm, 2 Mohm, 20 Mohm. Resistance Accuracy: 200 ohm to 200 kohm ranges ± (1.0 % rdg + 4 dgts), 2 Mohm range ± (1.5 % rdg + 4 dgts), 20 Mohm range ± (2.0 % rdg + 5 dgts). Resistance Resolution: 100 mohm. Non-contact voltage detector (NCV) AC volts: 70 to 600 V ac. Non-contact voltage detector (NCV): Red LED and Audible Indicator. Display: 3-1/2 digit LCD, 1999 counts. Display Update Rate: 2.5/sec, nominal.



 

Standard Calibration $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AMPROBE 30XR-A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your AMPROBE 30XR-A CALIBRATION and/or AMPROBE 30XR-A Auto Ranging Digital Multimeter with Non-Contact Volt Detect REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: