THORLABS S3FC1550 CALIBRATION and THORLABS S3FC1550 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the THORLABS S3FC1550 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   THORLABS S3FC1550   Description / Specification:    
THORLABS S3FC1550 1550 nm Benchtop Fiber Pigtailed Laser Source

The Thorlabs S3FC1550 Benchtop Fiber Pigtailed Laser Source is ideal for fiber based applications. Our S3FC Series comes with a pigtailed DFB Laser diode with single mode fiber behind an FC/PC bulkhead connector. Our fiber pigtailed lasers utilize an angled fiber ferrule at the internal laser/fiber launch point to minimize reflections back into the laser diode and built in temperature control, thereby increasing the overall stability. Specifications. Wavelength: 1550 nm. Min Full Output Power: 1.5 mW. Stability: 15 min: ±0.05 dB, 24 hr:±0.1 dB (After 1 hr Warm-up at 25 ± 10 °C Ambient). Display Accuracy: ±10%. Setpoint Resolution: 0.01 mW. Adjustment Range: ~0 mW to Full Power. TEC Stability: 0.005 °C/ 1 °C. TEC Setpoint Accuracy: ±0.25 °C. TEC Setpoint Resolution: ±0.1 °C. TEC Adjustment Range: 20 ± 1 °C to 30 ± 1 °C. Modulation Input: 0 - 5 V = 0 - Full Power, DC or Sine Wave Input Only. Modulation Bandwidth: 5 kHz Full Depth of Modulation, 30 kHz Small Signal Modulation. Fiber: SMF-28e.



 

Standard Calibration $330.00 *
*This is a Web introductory price for one calibration of the THORLABS S3FC1550. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your THORLABS S3FC1550 CALIBRATION and/or THORLABS S3FC1550 1550 nm Benchtop Fiber Pigtailed Laser Source REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: