Keysight (Agilent) N2781B CALIBRATION and Keysight (Agilent) N2781B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the Keysight (Agilent) N2781B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Oscilloscope Accessory?
Shop for Comparable Products on our  used Oscilloscope Accessory page

 
   Keysight (Agilent) N2781B   Description / Specification:    
Keysight (Agilent) N2781B 10 MHz/150A AC/DC Current Probe

The Agilent N2781B AC/DC Current Probe is compatible with any oscilloscope with high impedance BNC input, the new N2781B current probe offers accurate and reliable solution for measuring ac and dc currents. It features broad measurement ranges (up to 150 A), flat frequency response, low noise and low insertion loss that make the probes ideal for current measurements in areas such as measuring steady state or transient current of motor drives, switching power supplies, inverters, controllers, sensors, disk drives, LCD displays, electronic ballasts and amplifiers. Specifications. Bandwidth (-3dB): DC to 10 MHz. Risetime: 35 ns or less. Maximum current (continuous) RMS: 150A. Maximum peak current (non-continuous): 300 A peak. Lowest measurable current (at ±3% accuracy at DC, scope set to 1 mV/div and high-resolutionmode on): 20 mA. Output voltage rate: 0.01 V/A (100:1). Max input voltage (Insulated conductor should be used): 600 V CAT II, 300 V CAT III. Amplitude accuracy (DC and 45 to 66 Hz, rated current): ±1.0% rdg. ± 100 mA. Noise (measured with 20 MHz bandwidth limit filter on the scope): Equivalent to 25 mArms or less. Maximum rated power: 5.5 VA (with rated current).



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the Keysight (Agilent) N2781B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your Keysight (Agilent) N2781B CALIBRATION and/or Keysight (Agilent) N2781B 10 MHz/150A AC/DC Current Probe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: