Custom-Cal has a high success rate in the repair of the ANRITSU MP2100A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MP2100A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Bit Error Rate Tester (BERT)?
Shop for Comparable Products on our
 used Bit Error Rate Tester (BERT) page or new Bit Error Rate Tester (BERT) page

   ANRITSU MP2100A   Description / Specification:    
ANRITSU MP2100A BERTWave, BERT, Eye/Pulse Scope

The Anritsu MP2100A BERTWave is an all-in-one instrument supporting simultaneous BER measurements and Eye-pattern analysis. It supports both electrical and optical interfaces for performing simultaneous TRx evaluations of optical modules, cutting measurement times. The built-in remote high-speed mode supports mixed remote functions for batch processing multiple commands and cuts BER measurement times by 30% to 10 ms. High-speed sampling supports fast mask tests in about 12 s, cutting measurement times.

Eye/Pulse Scope.
Wave Display: Eye Pattern, Pulse Pattern.
Measurement Function: Time and Amplitude tests, Histogram, Eye Mask/Mask Margin Tests.
Digital System: 100 k sample/s (typ.).
Horizontal System Clock Trigger Input;
  Frequency Range: 0.1 GHz to 12.5 GHz,
  Sensitivity: 100 mVp-p (typ.),
  Maximum Amplitude: 2 Vp-p.
Vertical System (Electrical Input);
  Bandwidth (-3 dB): DC to 20 GHz (min.), DC to 25 GHz (typ.),
  Flatness: ±1 dB (typ.),
  RMS Noise: 3.5 mV or less, 2 mV (typ.),
  Maximum Input: ±2 V.
Vertical System (Optical Input);
  Fiber: 62.5 μm, Multimode, accepts single mode,
  Wavelength: 750 nm to 1650 nm,
  Bandwidth: DC to 9 GHz (typ., Unfiltered, -3 dB electrical).

Internal Reference Clock Accuracy: ±10 ppm Offset Variability: ±100 ppm, 1 ppm step.
Data Output Amplitude: Variable 0.1 Vp-p to 0.8 Vp-p, 10 mV step, AC coupled.
Data Output Amplitude Accuracy: ±20 mV ±20% for settings.
Test Pattern PRBS: 27 - 1, 29 - 1, 215 - 1, 223 - 1, 231 - 1 (Invert ON/OFF).
Test Pattern User Data: 1.3 Mbits (Editable Text File, Presence Sample File).

Offset Capacity: ±100 ppm.
Electrical Data Input 0.1 Vp-p to 0.8 Vp-p, DC coupled: 8.5 Gbit/s to 11.32 Gbit/s and 1/N bit rate above (10.3125 Gbit/s, single-ended 0.1 Vp-p, loopback, PRBS31, mark ratio 1/2, 20° to 30°C, BER <1E-12)
Test Pattern PRBS: 27 - 1, 29 - 1, 215 - 1, 223 - 1, 231 - 1 (Invert ON/OFF).
Test Pattern User Data: 1.3 Mbits (Editable Text File, Presence Sample File).

External 10 MHz Input Connector;
Amplitude: 0.7 Vp-p to 2 Vp-p, AC coupled.
Connector: BNC connector, 50 Ω.
Waveform: Square or Sine wave.

External Reference Clock Input;
External: 1/16 Clock Input.
Amplitude: 0.2 Vp-p to 1.5 Vp-p, AC coupled.
Connector: SMA connector, 50 Ω.
Waveform: Square or Sine wave.

-001, Dual Electrical Receiver.
-003, Optical/Single-ended Electrical Receiver.
-005, Extended PPG/ED Channel.
-007, 1ch Electrical BERT and Optical/Single-ended Electrical Scope.
-030, GPIB.
-037, FC Connector.
-040, SC Connector.
-050, XFP Slot.
-051, SFP+ Slot.
-052, Full Rate Clock Output.
-055, Clock Recovery for Eye/Pulse Scope.
-061, 1 High Bit Rate Filter.
-062, 2 High Bit Rate Filter Bank.
-063, 3 to 4 High Bit Rate Filter Bank.
-064, 1 to 2 Low Bit Rate Filter Bank.
-065, 3 to 4 Low Bit Rate Filter Bank.
-066, 1 High Bit Rate/1 to 2 Low Bit Rate Filter Bank.
-067, 1 to 2 High Bit Rate/3 to 4 Low Bit Rate Filter Bank.
-068, 2 to 3 High Bit Rate/1 to 2 Low Bit Rate Filter Bank.
-069, 3 High Bit Rate/3 Low Bit Rate Filter Bank.
-070, LPF for 156M (L).
-071, LPF for 622M (L).
-072, LPF for 1.0G (L).
-073, LPF for 1.2G (L).
-076, LPF for 2.1G (H).
-077, LPF for 2.5G (H).
-078, LPF for 2.6G (H).
-079, LPF for 3.1G (H).
-080, LPF for 4.2G (H).
-081, LPF for 5.0G (H).
-082, LPF for 6.2G (H).
-084, LPF for 9.9G to 10.3G (H).
-085, LPF for 10.5G to 11.3G (H).
-086, LPF for Multi 10G (H).
-090, Bit Rate Extension for PPG/ED.
-091, ED High Sensitivity.


Standard Calibration $980.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MP2100A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your ANRITSU MP2100A REPAIR and/or ANRITSU MP2100A BERTWave, BERT, Eye/Pulse Scope CALIBRATION

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: