A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2024A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

   ANRITSU MS2024A   Description / Specification:   Spec Sheet 
ANRITSU MS2024A 4 GHz VNA Master Handheld Vector Network Analyzer

The Anritsu MS2024A VNA Master is a 1-port and 2-port handheld vector network analyzer (VNA), which uses the superior Frequency Domain Reflectometry (FDR) approach instead of the DC pulse technique of older Time Domain Reflectomtry (TDR) approaches. Using FDR, the VNA Master provides convenient 1-port measurements of return loss, VSWR, cable loss, Distance-To-Fault (DTF), and Smith Chart measurements in the field. Connect the VNA Master to a 2-port cable to measure cable loss, phase, and group delay. In other words, the VNA Master offers precise measurement capabilities for cables and antennas by simplifying S11 and S21 measurements in the field.

Frequency Range: 2 MHz to 4 GHz.
Frequency Accuracy: 25 ppm.
Frequency Resolution: 10 Hz.
Data Points: Low, Medium, High (137/275/551).
1-Port Power High: 0 dBm (typical).
2-Port Power High: 0 dBm (typical).
Corrected Directivity: 42 dB (2 MHz to 6 GHz).
Dynamic Range:
  70 dB (2 MHz to 10 MHz),
  80 dB (10 MHz to 3 GHz),
  70 dB (>3 GHz to 4 GHz).
Return Loss Range: 0 to 60 dB.
Return Loss Resolution: 0.01 dB.
VSWR Range: 1 to 65.
VSWR Resolution: 0.01.
Cable Loss Range: 0 to 30 dB.
Cable Loss Resolution: 0.01 dB.
1-Port/ 2-Port Phase Range: -180° to +180°.
1-Port/ 2-Port Phase Resolution: 0.01°.
Smith Chart Resolution: 0.01.
2-Port Gain Range: -120 to 100 dB.
2-Port Gain Resolution: 0.01 dB.
Maximum Input (Damage Level) into Vector Network Analyzer: Test Port, Type N: +23 dBm, ±50 VDC.

-005 Power Monitor (requires external detector).
-010 Built-in Bias-Tee.
-015 Vector Voltmeter.
-019 High Accuracy Power Meter (requires PSN50 or MA24106A, sold separately).
-031 GPS Receiver (includes GPS antenna).


Standard Calibration $490.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2024A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Pulse Power
Pulse Power, the energy transfer rate is averaged over the pulse width. Pulse width is considered to be the time between the 50 percent risetime/falltime amplitude points. Pulse power averages out any aberrations in the pulse envelope such as overshoot or ringing.

Please contact us for your ANRITSU MS2024A CALIBRATION and/or ANRITSU MS2024A 4 GHz VNA Master Handheld Vector Network Analyzer REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: