SORENSEN DCS33-33E CALIBRATION and SORENSEN DCS33-33E REPAIR

The SORENSEN DCS33-33E is currently in stock and available for purchase on our  Sales Page
It is also available for immediate rental.
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SORENSEN DCS33-33E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our
 used DC Power Supply page

 
   SORENSEN DCS33-33E   Description / Specification:    
SORENSEN DCS33-33E 33V 33A Single Output DC Power Supply

The Sorensen DCS33-33E DC System Power Supply is designed to provide highly stable, continuously variable output voltage and current for a broad range of development, system, and burn-in applications. The DCS Series employs high frequency switching regulator technology to achieve high power density and small package size. An automatic crossover system enables the unit to switch operating modes in response to varying load requirements. Features. Simultaneous digital display of both voltage and current. Ten turn potentiometer voltage and current controls permit high resolution setting of the output voltage and current from zero to the rated output. Flexible output configuration: multiple units can be connected in parallel or series to provide increased current or voltage. Remote sensing to compensate for losses in power leads. Remote voltage, resistive, current limit and OVP programming with selectable programming constants. Optional IEEE-488 interface for complete remote programming and readback capability. Specifications. Output Voltage: 0 to 33 V. Output Current: 0 to 33 A. Output Power: 1089 W. Line Regulation Voltage: 33 mV. Line Regulation Current: 33 mA. Load Regulation Voltage: 33 mV. Load Regulation Current: 33 mA. Meter Accuracy Voltage: 0.43 V. Meter Accuracy Current: 0.43 A. OVP Adjustment Range: 1.65 to 36.3 V. Output Noise and Ripple (V) (20 Hz - 20 MHz): Rms 4 mV, p-p 60 mV. Stability Voltage: 16.5 mV. Stability Current: 16.5 mA. Temperature Coefficient Voltage: 6.6 mV/°C. Temperature Coefficient Current: 9.9 mA/°C. Maximum Remote Sense Line Drop Compensation/line: 4 V.



 

Standard Calibration $185.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the SORENSEN DCS33-33E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.


Please contact us for your SORENSEN DCS33-33E CALIBRATION and/or SORENSEN DCS33-33E 33V 33A Single Output DC Power Supply REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: