AEMC 6505 CALIBRATION and AEMC 6505 REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEMC 6505 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   AEMC 6505 (2130.18)   Description / Specification:    
AEMC 6505 5000V Digital/Analog Megohmmeter

The AEMC 6505 5000V Digital/Analog Megohmmeter is designed to test insulation on cables, transformers, motors, generators, insulators and wiring installations. Rugged weatherproof megohmmeter is ideal for high resistance or absorption tests, spot reading tests, Dielectric Absorption Ratio (DAR & Polarization Index (PI) tests & more. Specifications. Test Voltage: 500V (30 kohm to 2000 Mohm), 1000V (100 kohm to 4000 Mohm), 2500V (100 kohm to 10,000 Mohm), 5000V (300 kohm to 10,000 Mohm). User Selectable Test Voltage Programmable: 40 to 1000V (10V increments), 1000 to 5100V (100V increments). Short Circuit Current: <1.6 mA ± 5%. DAR (1 min/30 sec): 0.02 to 50.00. Capacitance Measurement: 0.005 to 49.99 µF; Max resolution 1 nF. Leakage Current Measurement: 0.00 nA to 3 mA; Max resolution 1 pA. Discharge After Test: Yes, automatic. Discharge Voltage Display: Yes. Voltage Test/Safety Check: 0 to 1000 Vac/dc (16 to 420Hz); 1V Resolution. Voltage Warning Indicator: Yes >25V. Test Inhibition: Yes >25V.



 

Standard Calibration $295.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEMC 6505. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output


Please contact us for your AEMC 6505 CALIBRATION and/or AEMC 6505 5000V Digital/Analog Megohmmeter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: